STAUFF · Replacement Elements · inline line

RP-240-E-05-B filter element: specifications & equivalents

Name: RP-240-E-05-B filter element — STAUFF specifications and cross references
Brand: STAUFF

The RP-240-E-05-B is a STAUFF inline-line hydraulic filter element, sized 152 × 649 mm OD × length (ID 82.3 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 152 × 649 mm

Inside diameter 82.3 mm

Line type inline

Partially verified. Fit and grade trace to an official interchange document; dimensional values are compiled from 0 aftermarket listing(s) and must be confirmed against the manufacturer housing drawing. Confidence score 0.85.

Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	152 mm
Inside diameter ID	82.3 mm
Length	649 mm
Integral bypass valve	none (housing/valve-dependent)
Source catalog	STAUFF: STAUFF Filter Interchange online database (filterinterchange.com)
Last verified	2026-09-27

Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.

STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.

Dimensions & series range

Outside diameter	152 mm (5.984 in)
Inside diameter	82.3 mm (3.240 in)
Overall length	649 mm (25.551 in)

All 152×649 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 01269063 page in verification queue	UFI	partial	STAUFF Filter Interchange lists 01269063 (HYDAC) as replaced by RP-240-E-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 0584006VG10BP26 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 05.8400. 6VG.10.B.P.26 (INTERNORMEN) as replaced by RP-240-E-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ 933227Q page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists 933227Q (PARKER) as replaced by RP-240-E-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.
↔ R928016750 page in verification queue	Aftermarket	partial	STAUFF Filter Interchange lists R 928016750 (EPE / Bosch-Rexroth Filtration) as replaced by RP-240-E-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the RP-240-E-05-B model number is decoded

RP-240-E-05-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.

Typical equipment & applications

Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the RP-240-E-05-B filter element?

The published envelope is 152 mm OD × 649 mm length with a 82.3 mm inside diameter (5.984 × 25.551 in × 3.240 in ID). Confirm against the housing drawing before ordering.

What replaces the RP-240-E-05-B filter element?

4 partial match(es) requiring parameter review

How do I read the RP-240-E-05-B part number?

See the designation decoder above: each segment of RP240E05B encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 4 catalog element(s) share the 152×649 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RP-240-E-03-B STAUFF RP-240-E-10-B STAUFF RP-240-E-10-V STAUFF RP-240-E-20-B STAUFF

Other models in the Replacement Elements series

All 3832 →

AD-030-B-125-B 83×193 mm AD-030-B-40-B 83×193 mm AD-030-B-60-B 83×193 mm AD-030-B-80-B 83×193 mm AD-030-E-20-B 83×193 mm AD-033-B-40-B 89×226 mm AD-033-B-60-B 89×226 mm AD-033-B-80-B 89×226 mm FE-BL-200 85×61 mm FE-BL-500 190×105 mm

Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-27. Read our editorial & correction policy.