STAUFF · Replacement Elements · inline line
RL-005-E-20-B filter element: specifications & equivalents
The RL-005-E-20-B is a STAUFF inline-line hydraulic filter element, sized 41.5 × 91.5 mm OD × length (ID 22.6 mm). Verify against the current manufacturer data sheet before ordering.
Micron rating, media type, collapse pressure and seal material are not printed in the STAUFF interchange listing and are pending extraction from STAUFF product data sheets. Verify against the current STAUFF catalog before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 41.5 mm |
| Inside diameter ID | 22.6 mm |
| Length | 91.5 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Source catalog | STAUFF: STAUFF Filter Interchange online database (filterinterchange.com) |
| Last verified | 2026-09-28 |
Sources: STAUFF — STAUFF Filter Interchange online database (filterinterchange.com) — accessed 2026-09-27.
STAUFF® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized STAUFF distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 41.5 mm (1.634 in) |
| Inside diameter | 22.6 mm (0.890 in) |
| Overall length | 91.5 mm (3.602 in) |
All 42×92 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ RMR493E20B | Filtrec | full | Filtrec's official Cross Navigator maps STAUFF RL005E20B to FILTREC RMR493E20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 01269181 page in verification queue | UFI | partial | STAUFF Filter Interchange lists 01269181 (HYDAC) as replaced by RL-005-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ 9700146152 page in verification queue | Aftermarket | partial | STAUFF Filter Interchange lists 9700146152 (MAHLE / Filtration Group) as replaced by RL-005-E-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: STAUFF cross reference chart →
How the RL-005-E-20-B model number is decoded
- RL-005-E-20-BSTAUFF replacement element part number per the STAUFF Filter Interchange database.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the RL-005-E-20-B filter element?
What replaces the RL-005-E-20-B filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 14 catalog element(s) share the 42×92 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Replacement Elements series
All 4930 (list page 5/10) →Reviewed & verified by the ElementRef engineering desk against STAUFF on 2026-09-28. Read our editorial & correction policy.