Schroeder Industries · BestFit Elements · inline line
8TZX5V filter element: specifications & equivalents
The 8TZX5V is a Schroeder Industries inline-line hydraulic filter element, built with excellement® z-media® (synthetic) media, sized 81 × 208 mm OD × length (ID 43 mm), rated at 5 µm class (6.3 µm at β(c) ≥ 1000 (99.9% efficiency)). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 81 × 208 mm
Inside diameter 43 mm
Filtration rating 5 µm nom.
Beta rating 6.3 µm at β(c) ≥ 1000 (99.9% efficiency)
Media Excellement® Z-Media® (Synthetic)
Collapse / burst 207 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Dimensions, ratings and seal compound are taken from the Schroeder Industries online catalog. The nominal µm rating and the β200 absolute rating use different conventions — match the existing media grade before substituting; verify against the current Schroeder data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Excellement® Z-Media® (Synthetic) |
| Filtration rating | 5 µm |
| Rating basis | nominal |
| Beta ratio | 6.3 µm at β(c) ≥ 1000 (99.9% efficiency) |
| Outside diameter OD | 81 mm |
| Inside diameter ID | 43 mm |
| Length | 208 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 207 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | Fluorocarbon (Viton) |
| Operating temperature | -29 to 121 °C |
| Mass | 1270 g |
| Source catalog | Schroeder Industries: Schroeder Industries online catalog (catalog.schroederindustries.com) |
| Last verified | 2026-09-28 |
Sources: Schroeder Industries — Schroeder Industries online catalog (catalog.schroederindustries.com) — accessed 2026-09-28.
Schroeder Industries® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Schroeder Industries distributor.
Dimensions & series range
| Outside diameter | 81 mm (3.189 in) |
| Inside diameter | 43 mm (1.693 in) |
| Overall length | 208 mm (8.189 in) |
All 81×208 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0596016VG210EV8 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals. |
|
↔ 11108D06BHV page in verification queue | Aftermarket | partial | Schroeder online cross-reference (HYDAC); envelope match — verify grade and seals. |
|
↔ 2HF31H6SLC000V page in verification queue | Aftermarket | partial | Schroeder online cross-reference (EPE); envelope match — verify grade and seals. |
|
↔ 891017SMVST6 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (MAHLE); envelope match — verify grade and seals. |
|
↔ 8960H15V08 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (SEPARATION TECHNOLOGIES); envelope match — verify grade and seals. |
|
↔ 934194 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (PARKER); envelope match — verify grade and seals. |
|
↔ BAU180V page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
|
↔ FAU180V page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
|
↔ FD141G06BV page in verification queue | Aftermarket | partial | Schroeder online cross-reference (FRAM); envelope match — verify grade and seals. |
|
↔ H96018003VH page in verification queue | Aftermarket | partial | Schroeder online cross-reference (HYCON); envelope match — verify grade and seals. |
|
↔ H9608MAVH page in verification queue | Aftermarket | partial | Schroeder online cross-reference (POROUS MEDIA/FILTERSOFT); envelope match — verify grade and seals. |
| ↔ HC9601FCN8Z | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
|
↔ HC9601FDN8Z page in verification queue | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
|
↔ HC9601FKN8Z page in verification queue | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
|
↔ HC9601FUN8Z page in verification queue | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
|
↔ HC9601FXN8Z page in verification queue | Pall | partial | Schroeder online cross-reference (PALL); envelope match — verify grade and seals. |
|
↔ HYU180V page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
| ↔ P167185 | Donaldson | partial | Schroeder online cross-reference (DONALDSON); envelope match — verify grade and seals. |
|
↔ STU180V page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
|
↔ V6023V2H03 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals. |
|
↔ V6024V2H05 page in verification queue | Aftermarket | partial | Schroeder online cross-reference (VICKERS); envelope match — verify grade and seals. |
|
↔ WEU180V page in verification queue | Aftermarket | partial | Schroeder online cross-reference (NORMAN); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the 8TZX5V model number is decoded
- 8TZX5VSchroeder BestFit filter element part number of the 8T housing-size family.
- Excellement® Z-Media® (Synthetic)Filter media execution.
- 5 µmNominal filter rating as printed in the Schroeder catalog.
- β≥1000Absolute rating: 6.3 µm particle size at β(c) ≥ 1000, 99.9% efficiency.
- 81 mmOuter diameter.
- 43 mmInner diameter.
- 208 mmElement height.
- 207 barElement collapse pressure rating.
- Fluorocarbon (Viton)Seal compound.
Typical equipment & applications
- Replacement element for Schroeder hydraulic and lube filter housings
- Industrial and mobile hydraulic filtration
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the 8TZX5V filter element?
The published envelope is 81 mm OD × 208 mm length with a 43 mm inside diameter (3.189 × 8.189 in × 1.693 in ID). Confirm against the housing drawing before ordering.
What micron rating does 8TZX5V use?
This element is rated 5 µm (nominal class) — 6.3 µm at β(c) ≥ 1000 (99.9% efficiency). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the 8TZX5V filter element?
22 partial match(es) requiring parameter review
How do I read the 8TZX5V part number?
See the designation decoder above: each segment of 8TZX5V encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 8 catalog element(s) share the 81×208 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the BestFit Elements series
All 1082 →Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-09-28. Read our editorial & correction policy.