Parker · ParFit Interchange · inline line
925602Q filter element: specifications & equivalents
The 925602Q is a Parker inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
ParFit catalogs list the interchange only — Parker prints no dimensions, micron rating, collapse pressure or seal data in the interchange table. Verify every specification against the current Parker data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | 925602Q |
| Source catalog | Parker Hannifin (Hydraulic Filter Division): Parker ParFit™ Competitive Interchange |
| Last verified | 2026-09-30 |
Sources: Parker Hannifin (Hydraulic Filter Division) — Parker ParFit™ Competitive Interchange — accessed 2026-09-30.
Parker® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Parker distributor.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ HC9020FDP8H page in verification queue | Pall | partial | Parker ParFit interchange — Pall HC9020FDP8H replaced by Parker 925602Q. Envelope match; verify grade and seals. |
| ↔ HC9020FKP8H | Pall | partial | Parker ParFit interchange — Pall HC9020FKP8H replaced by Parker 925602Q. Envelope match; verify grade and seals. |
| ↔ HD5017 | MANN-FILTER | partial | MANN-FILTER's online catalog lists 925602Q (PARKER (PARKER HANNIFIN)) as a comparison number for HD5017. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30437 | Fleetguard | partial | Fleetguard's online catalog lists 925602Q as an interchange for HF30437. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9020-8Z3B | Schroeder Industries | partial | Schroeder online cross-reference (PARKER); envelope match — verify grade and seals. |
| ↔ SBF-9020-8Z3V | Schroeder Industries | partial | Schroeder online cross-reference (PARKER); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the 925602Q model number is decoded
- 925602QParker ParFit replacement element part number per the Parker Hydraulic Filter Division interchange catalog.
Typical equipment & applications
- Hydraulic/lubrication filter element per Parker ParFit™ competitive interchange.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What replaces the 925602Q filter element?
How do I read the 925602Q part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Other models in the ParFit Interchange series
All 935 →Reviewed & verified by the ElementRef engineering desk against Parker Hannifin (Hydraulic Filter Division) on 2026-09-30. Read our editorial & correction policy.