MP Filtri · Legacy Interchange · inline line

STR1004SG1M90 filter element: specifications & equivalents

The STR1004SG1M90 is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.

Line type inline
Partially verified. Fit and grade trace to an official interchange document; this part number's own dimensions and ratings are not published — the values in the interchange-derived table below are inherited from a cross-referenced counterpart and must be confirmed against the MP Filtri housing drawing. Confidence score 0.70.

This part number is listed as an MP Filtri interchange in the MANN-FILTER, Baldwin Form 561 cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.

Specification table

ParameterValue
Filter type inline line
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. STR1004SG1M90
Source catalog MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en)
Baldwin Filters: Baldwin Filters Form 561
Last verified2026-10-17

Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) · Baldwin Filters — Baldwin Filters Form 561 — accessed 2026-09-27.

MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.

Interchange-derived dimensions & ratings

STR1004SG1M90 is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with HF35162 (Fleetguard), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Fleetguard data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.

Parameter (inherited from HF35162)Value
Outside diameter OD86 mm
Length260 mm
Filtration rating115 µm absolute
Beta rating115 µm at β75(c) per ISO 16889
Collapse / burst1 bar

Cross-reference level partial — Fleetguard's online catalog lists STR1004SG1M90 as an interchange for HF35162. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. Values sourced from Cummins Filtration / Fleetguard via the HF35162 page on this site. Inherited from the counterpart's published data on 2026-10-17.

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ HD10016MANN-FILTERpartialMANN-FILTER's online catalog lists STR1004SG1M90 (MP FILTRI) as a comparison number for HD10016. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF35162FleetguardpartialFleetguard's online catalog lists STR1004SG1M90 as an interchange for HF35162. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ PT23475Baldwin FilterspartialBaldwin's Form 561 Number-Finder cross-reference lists STR1004SG1M90 (MP FILTRI) as replaced by Baldwin PT23475. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: MP Filtri cross reference chart →

How the STR1004SG1M90 model number is decoded

  • STR1004SG1M90Legacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.

Typical equipment & applications

  • Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.

Frequently asked questions

What replaces the STR1004SG1M90 filter element?
3 partial match(es) requiring parameter review
What are the STR1004SG1M90 filter element dimensions?
No dimensions or ratings are published for STR1004SG1M90 — the manufacturer's interchange document lists the swap only. It pairs this element with HF35162 (Fleetguard), which fits the same filter housing, whose published envelope is 86 × 260 mm. Those values are inherited from the Fleetguard data sheet, not a MP Filtri publication, so confirm against the housing drawing before ordering.

Other models in the Legacy Interchange series

All 2284 (list page 5/5) →

Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER and Baldwin Filters on 2026-10-17. Read our editorial & correction policy.