MP Filtri · Legacy Interchange · inline line
MP9606 filter element: specifications & equivalents
The MP9606 is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the Schroeder BestFit cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | MP9606 |
| Source catalog | Schroeder Industries: Schroeder Industries online Cross-Reference tool (schroederindustries.com) |
| Last verified | 2026-10-17 |
Sources: Schroeder Industries — Schroeder Industries online Cross-Reference tool (schroederindustries.com) — accessed 2026-09-30.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
MP9606 is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with SE-090-G-10-B (STAUFF), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are STAUFF data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from SE-090-G-10-B) | Value |
|---|---|
| Outside diameter OD | 90.5 mm |
| Inside diameter ID | 48.5 mm |
| Length | 164 mm |
Cross-reference level partial — STAUFF Filter Interchange lists MP9606 (MP-FILTRI) as replaced by SE-090-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. Values sourced from STAUFF via the SE-090-G-10-B page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ SBF-0330D-Z10B | Schroeder Industries | partial | Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals. |
| ↔ SE-090-G-10-B | STAUFF | partial | STAUFF Filter Interchange lists MP9606 (MP-FILTRI) as replaced by SE-090-G-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the MP9606 model number is decoded
- MP9606Legacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the MP9606 filter element?
What are the MP9606 filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 5/5) →Reviewed & verified by the ElementRef engineering desk against Schroeder Industries on 2026-10-17. Read our editorial & correction policy.