MP Filtri · Legacy Interchange · inline line
MP5113 filter element: specifications & equivalents
The MP5113 is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the Baldwin Form 561, Schroeder BestFit cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | MP5113 |
| Source catalog | Baldwin Filters: Baldwin Filters Form 561 Schroeder Industries: Schroeder Industries online Cross-Reference tool (schroederindustries.com) |
| Last verified | 2026-10-17 |
Sources: Baldwin Filters — Baldwin Filters Form 561 · Schroeder Industries — Schroeder Industries online Cross-Reference tool (schroederindustries.com) — accessed 2026-09-30.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
MP5113 is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with HF30613 (Fleetguard), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Fleetguard data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from HF30613) | Value |
|---|---|
| Outside diameter OD | 50.17 mm |
| Inside diameter ID | 23.93 mm |
| Length | 113.54 mm |
Cross-reference level partial — Fleetguard's online catalog lists MP5113 as an interchange for HF30613. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. Values sourced from Cummins Filtration / Fleetguard via the HF30613 page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ HF30613 | Fleetguard | partial | Fleetguard's online catalog lists MP5113 as an interchange for HF30613. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23418-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists MP5113 (MP FILTRI) as replaced by Baldwin PT23418-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9801-4Z3V | Schroeder Industries | partial | Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals. |
| ↔ SP-024-F-03-B | STAUFF | partial | STAUFF Filter Interchange lists MP5113 (MP-FILTRI) as replaced by SP-024-F-03-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the MP5113 model number is decoded
- MP5113Legacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the MP5113 filter element?
What are the MP5113 filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 4/5) →Reviewed & verified by the ElementRef engineering desk against Baldwin Filters and Schroeder Industries on 2026-10-17. Read our editorial & correction policy.