MP Filtri · Legacy Interchange · inline line
MP4103 filter element: specifications & equivalents
The MP4103 is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the Schroeder BestFit, Filtrec Cross Navigator cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | MP4103 |
| Source catalog | Schroeder Industries: Schroeder Industries online Cross-Reference tool (schroederindustries.com) Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-17 |
Sources: Schroeder Industries — Schroeder Industries online Cross-Reference tool (schroederindustries.com) · Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-09-30.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
MP4103 is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with D140G10AV (Filtrec), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Filtrec data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from D140G10AV) | Value |
|---|---|
| Outside diameter OD | 78 mm |
| Inside diameter ID | 43.2 mm |
| Length | 116 mm |
| Filtration rating | 12 µm absolute |
| Media | glassfiber |
| Beta rating | β12(c)≥1000 |
Cross-reference level full — Filtrec's official Cross Navigator maps MP FILTRI MP4103 to FILTREC D140G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Values sourced from Filtrec S.p.A. via the D140G10AV page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ D140G10AV | Filtrec | full | Filtrec's official Cross Navigator maps MP FILTRI MP4103 to FILTREC D140G10AV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF30210 | Fleetguard | partial | Fleetguard's online catalog lists MP4103 as an interchange for HF30210. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF7066 | Fleetguard | partial | Fleetguard's online catalog lists MP4103 as an interchange for HF7066. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9600-4Z10V | Schroeder Industries | partial | Schroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the MP4103 model number is decoded
- MP4103Legacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the MP4103 filter element?
What are the MP4103 filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 3/5) →Reviewed & verified by the ElementRef engineering desk against Schroeder Industries and Filtrec S.p.A. on 2026-10-17. Read our editorial & correction policy.