MP Filtri · Legacy Interchange · inline line

MF1002P10NB filter element: specifications & equivalents

The MF1002P10NB is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.

Line type inline
Partially verified. Fit and grade trace to an official interchange document; this part number's own dimensions and ratings are not published — the values in the interchange-derived table below are inherited from a cross-referenced counterpart and must be confirmed against the MP Filtri housing drawing. Confidence score 0.70.

This part number is listed as an MP Filtri interchange in the Schroeder BestFit, Filtrec Cross Navigator cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.

Specification table

ParameterValue
Filter type inline line
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. MF1002P10NB
Source catalog Schroeder Industries: Schroeder Industries online Cross-Reference tool (schroederindustries.com)
Filtrec S.p.A.: Filtrec Cross Navigator
Last verified2026-10-17

Sources: Schroeder Industries — Schroeder Industries online Cross-Reference tool (schroederindustries.com) · Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-09-30.

MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.

Interchange-derived dimensions & ratings

MF1002P10NB is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with R122C10B (Filtrec), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Filtrec data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.

Parameter (inherited from R122C10B)Value
Outside diameter OD70 mm
Inside diameter ID29.5 mm
Length127 mm
Filtration rating10 µm
Mediacellulose
Beta ratingβ10(c)≥2

Cross-reference level full — Filtrec's official Cross Navigator maps MP FILTRI MF1002P10NB to FILTREC R122C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Values sourced from Filtrec S.p.A. via the R122C10B page on this site. Inherited from the counterpart's published data on 2026-10-17.

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ R122C10BFiltrecfullFiltrec's official Cross Navigator maps MP FILTRI MF1002P10NB to FILTREC R122C10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 5TB10Schroeder IndustriespartialSchroeder online cross-reference (MP FILTRI); envelope match — verify grade and seals.
↔ HF35377FleetguardpartialFleetguard's online catalog lists MF1002P10NB as an interchange for HF35377. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: MP Filtri cross reference chart →

How the MF1002P10NB model number is decoded

  • MF1002P10NBLegacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.

Typical equipment & applications

  • Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.

Frequently asked questions

What replaces the MF1002P10NB filter element?
1 catalog-confirmed full match(es) (R122C10B); 2 partial match(es) requiring parameter review
What are the MF1002P10NB filter element dimensions?
No dimensions or ratings are published for MF1002P10NB — the manufacturer's interchange document lists the swap only. It pairs this element with R122C10B (Filtrec), which fits the same filter housing, whose published envelope is 70 × 127 mm. Those values are inherited from the Filtrec data sheet, not a MP Filtri publication, so confirm against the housing drawing before ordering.

Other models in the Legacy Interchange series

All 2284 (list page 2/5) →

Reviewed & verified by the ElementRef engineering desk against Schroeder Industries and Filtrec S.p.A. on 2026-10-17. Read our editorial & correction policy.