MP Filtri · Legacy Interchange · inline line
F10A25NA filter element: specifications & equivalents
The F10A25NA is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the Baldwin Form 561 cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | F10A25NA |
| Source catalog | Baldwin Filters: Baldwin Filters Form 561 |
| Last verified | 2026-10-17 |
Sources: Baldwin Filters — Baldwin Filters Form 561 — accessed 2026-09-30.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
F10A25NA is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with HF35204 (Fleetguard), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Fleetguard data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from HF35204) | Value |
|---|---|
| Outside diameter OD | 70 mm |
| Inside diameter ID | 28.7 mm |
| Length | 135.5 mm |
| Filtration rating | 17 µm absolute |
| Beta rating | 17 µm at β75(c) per ISO 16889 |
| Collapse / burst | 10 bar |
Cross-reference level partial — Fleetguard's online catalog lists F10A25NA as an interchange for HF35204. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. Values sourced from Cummins Filtration / Fleetguard via the HF35204 page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ HF35204 | Fleetguard | partial | Fleetguard's online catalog lists F10A25NA as an interchange for HF35204. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9256-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists F10A25NA (MP FILTRI) as replaced by Baldwin PT9256-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the F10A25NA model number is decoded
- F10A25NALegacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the F10A25NA filter element?
What are the F10A25NA filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 1/5) →Reviewed & verified by the ElementRef engineering desk against Baldwin Filters on 2026-10-17. Read our editorial & correction policy.