MP Filtri · Legacy Interchange · inline line
DC130CA10AN filter element: specifications & equivalents
The DC130CA10AN is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the Filtrec Cross Navigator cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | DC130CA10AN |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-17 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
DC130CA10AN is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with RHR1300G10B3/AB1 (Filtrec), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Filtrec data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from RHR1300G10B3/AB1) | Value |
|---|---|
| Outside diameter OD | 143.5 mm |
| Inside diameter ID | 96.5 mm |
| Length | 483 mm |
| Filtration rating | 12 µm absolute |
| Media | glassfiber |
| Beta rating | β12(c)≥1000 |
Cross-reference level full — Filtrec's official Cross Navigator maps MP FILTRI DC130CA10AN to FILTREC RHR1300G10B3/AB1 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Values sourced from Filtrec S.p.A. via the RHR1300G10B3/AB1 page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ RHR1300G10B3/AB1 | Filtrec | full | Filtrec's official Cross Navigator maps MP FILTRI DC130CA10AN to FILTREC RHR1300G10B3/AB1 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the DC130CA10AN model number is decoded
- DC130CA10ANLegacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the DC130CA10AN filter element?
What are the DC130CA10AN filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 1/5) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-17. Read our editorial & correction policy.