MP Filtri · Legacy Interchange · inline line
CT100P10AB filter element: specifications & equivalents
The CT100P10AB is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the Filtrec Cross Navigator cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | CT100P10AB |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-17 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
CT100P10AB is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with A220C10BM (Filtrec), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Filtrec data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from A220C10BM) | Value |
|---|---|
| Outside diameter OD | 128 mm |
| Length | 182 mm |
| Filtration rating | 10 µm |
| Media | cellulose |
| Beta rating | β10(c)≥2 |
Cross-reference level full — Filtrec's official Cross Navigator maps MP FILTRI CT100P10AB to FILTREC A220C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Values sourced from Filtrec S.p.A. via the A220C10BM page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ A220C10BM | Filtrec | full | Filtrec's official Cross Navigator maps MP FILTRI CT100P10AB to FILTREC A220C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF6326 | Fleetguard | partial | Fleetguard's online catalog lists CT100P10AB as an interchange for HF6326. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SFCT-5710-E | STAUFF | partial | STAUFF Filter Interchange lists CT 100 P10AB (MP-FILTRI) as replaced by SFCT-5710-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the CT100P10AB model number is decoded
- CT100P10ABLegacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the CT100P10AB filter element?
What are the CT100P10AB filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 1/5) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-17. Read our editorial & correction policy.