MP Filtri · Legacy Interchange · inline line

CSG50P25AN filter element: specifications & equivalents

The CSG50P25AN is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.

Line type inline
Partially verified. Fit and grade trace to an official interchange document; this part number's own dimensions and ratings are not published — the values in the interchange-derived table below are inherited from a cross-referenced counterpart and must be confirmed against the MP Filtri housing drawing. Confidence score 0.70.

This part number is listed as an MP Filtri interchange in the MANN-FILTER, Fleetguard cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.

Specification table

ParameterValue
Filter type inline line
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. CSG50P25AN
Source catalog MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en)
Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com)
Last verified2026-10-17

Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) · Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-27.

MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.

Interchange-derived dimensions & ratings

CSG50P25AN is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with HF6057 (Fleetguard), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are Fleetguard data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.

Parameter (inherited from HF6057)Value
Outside diameter OD93.12 mm
Length148.34 mm
Filtration rating22 µm
Beta ratingTWA 22 µm at β=2 per ISO 16889
Thread / connection1-12 UNF-2B

Cross-reference level partial — Fleetguard's online catalog lists CSG50P25AN as an interchange for HF6057. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. Values sourced from Cummins Filtration / Fleetguard via the HF6057 page on this site. Inherited from the counterpart's published data on 2026-10-17.

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ HF6057FleetguardpartialFleetguard's online catalog lists CSG50P25AN as an interchange for HF6057. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ WD940/2MANN-FILTERpartialMANN-FILTER's online catalog lists CSG50P25AN (MP FILTRI) as a comparison number for WD9402. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: MP Filtri cross reference chart →

How the CSG50P25AN model number is decoded

  • CSG50P25ANLegacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.

Typical equipment & applications

  • Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.

Frequently asked questions

What replaces the CSG50P25AN filter element?
2 partial match(es) requiring parameter review
What are the CSG50P25AN filter element dimensions?
No dimensions or ratings are published for CSG50P25AN — the manufacturer's interchange document lists the swap only. It pairs this element with HF6057 (Fleetguard), which fits the same filter housing, whose published envelope is 93.12 × 148.34 mm. Those values are inherited from the Fleetguard data sheet, not a MP Filtri publication, so confirm against the housing drawing before ordering.

Other models in the Legacy Interchange series

All 2284 (list page 1/5) →

Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER and Cummins Filtration / Fleetguard on 2026-10-17. Read our editorial & correction policy.