MP Filtri · Legacy Interchange · inline line
CG100A06A filter element: specifications & equivalents
The CG100A06A is a MP Filtri inline-line hydraulic filter element. Verify against the current manufacturer data sheet before ordering.
This part number is listed as an MP Filtri interchange in the MANN-FILTER cross-reference table(s), but it has no occurrence in any current MP Filtri catalogue (164 catalogue PDFs and family booklets scanned on 2026-10-17) and is treated as a discontinued or superseded legacy code. This is an identity page that anchors the interchange only — no dimensions, micron rating, collapse pressure or seal data are available. Confirm form, fit and rating with the current supplier before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | CG100A06A |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-10-17 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MP Filtri® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MP Filtri distributor.
Interchange-derived dimensions & ratings
CG100A06A is listed in an interchange document that publishes the swap only — MP Filtri prints no dimensions, ratings or seals for this part number. That document pairs the element with WD13011X (MANN-FILTER), which fits the same filter housing, so the counterpart's published envelope and ratings are reproduced below as a practical starting point. They are MANN-FILTER data, not a MP Filtri publication — confirm against the MP Filtri housing drawing before ordering.
| Parameter (inherited from WD13011X) | Value |
|---|---|
| Outside diameter OD | 128 mm |
| Length | 175 mm |
| Thread / connection | 1 1/2-16 UN-2B |
Cross-reference level partial — MANN-FILTER's online catalog lists CG100A06A (MP FILTRI) as a comparison number for WD13011X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. Values sourced from MANN+HUMMEL / MANN-FILTER via the WD13011X page on this site. Inherited from the counterpart's published data on 2026-10-17.
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ WD13011X | MANN-FILTER | partial | MANN-FILTER's online catalog lists CG100A06A (MP FILTRI) as a comparison number for WD13011X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: MP Filtri cross reference chart →
How the CG100A06A model number is decoded
- CG100A06ALegacy MP Filtri part number as quoted in competitor interchange tables; its retired numbering scheme cannot be expanded under the current MP Filtri ordering-code rules.
Typical equipment & applications
- Hydraulic filtration interchange — legacy MP Filtri part number cited in competitor cross-reference tables.
Frequently asked questions
What replaces the CG100A06A filter element?
What are the CG100A06A filter element dimensions?
Other models in the Legacy Interchange series
All 2284 (list page 1/5) →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-10-17. Read our editorial & correction policy.