MANN-FILTER · HD / WD Hydraulic · inline line
WD13145/3 filter element: specifications & equivalents
The WD13145/3 is a MANN-FILTER inline-line hydraulic filter element, sized 135 × 310 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 135 × 310 mm
Thread M45x1.5-6H
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 135 mm |
| Length | 310 mm |
| Thread / connection | M45x1.5-6H |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD13145/3_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 135 mm (5.315 in) |
| Overall length | 310 mm (12.205 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 175558 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 175558 (FEBI-BILSTEIN) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 4843OS page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 4843-OS (KS KOLBENSCHMIDT) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 50014843 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 50 014 843 (KS KOLBENSCHMIDT) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 57022 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 57022 (WIX) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ B7135 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists B7135 (BALDWIN) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ B7175 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists B7175 (BALDWIN) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ C7302 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists C-7302 (SAKURA) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CS1662 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CS1662 (SAMPIYON) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LF3781 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LF3781 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LF3931 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LF3931 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LF9931 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LF9931 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LFP912 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LFP 912 (LUBER-FINER) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P550655 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P550655 (DONALDSON) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P551400 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P551400 (DONALDSON) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PH7748 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists PH7748 (FRAM) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SO10022 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SO 10022 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SP4843 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SP 4843 (SCHUPP / SF FILTER) as a comparison number for WD131453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD13145/3 model number is decoded
- WD13145/3MANN-FILTER hydraulic spin-on filter part number.
- 310 mmElement height (H).
- 135 mmOuter diameter (A).
- M45x1.5-6HSpin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD13145/3 filter element?
The published envelope is 135 mm OD × 310 mm length (5.315 × 12.205 in). Confirm against the housing drawing before ordering.
What replaces the WD13145/3 filter element?
17 partial match(es) requiring parameter review
How do I read the WD13145/3 part number?
See the designation decoder above: each segment of WD131453 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.