MANN-FILTER · HD / WD Hydraulic · inline line
WD13015 filter element: specifications & equivalents
The WD13015 is a MANN-FILTER inline-line hydraulic filter element, sized 127 × 227 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 127 × 227 mm
Thread G 1 1/4
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 127 mm |
| Length | 227 mm |
| Thread / connection | G 1 1/4 |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD13015_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 127 mm (5.000 in) |
| Overall length | 227 mm (8.937 in) |
All 127×227 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 01WP13025VG page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 01WP13025VG (INTERNORMEN) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8002400 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 80.024.00 (UFI) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ A121G25 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists A121G25 (FILTREC) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CA20003 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CA 200/03 (FBO) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CCA302EFV1 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CCA 302-E-FV-1 (SOFIMA) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CS15000A25A page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CS-150-0-0-A25-A (FAI FILTRI) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CS150A25A page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists CS150A25-A (MP FILTRI) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FC1053Q020BS00 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FC 1053 Q020BS00 (FINN-FILTER) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HEK4530210ASFG025B page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HEK 45-30.210-AS-FG025-B (IKRON) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HHC01858 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HHC01858 (IKRON) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P171619 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P171619 (DONALDSON) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH63710 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 63710 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH18066 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 18066 (SCHUPP / SF FILTER) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WHS46273 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WHS46273 (WISMET) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ZP3306MG page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ZP 3306 MG (FIL FILTER) as a comparison number for WD13015. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD13015 model number is decoded
- WD13015MANN-FILTER hydraulic spin-on filter part number.
- 227 mmElement height (H).
- 127 mmOuter diameter (A).
- G 1 1/4Spin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD13015 filter element?
The published envelope is 127 mm OD × 227 mm length (5.000 × 8.937 in). Confirm against the housing drawing before ordering.
What replaces the WD13015 filter element?
15 partial match(es) requiring parameter review
How do I read the WD13015 part number?
See the designation decoder above: each segment of WD13015 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 1 catalog element(s) share the 127×227 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.