MANN-FILTER · HD / WD Hydraulic · inline line
WD10013 filter element: specifications & equivalents
The WD10013 is a MANN-FILTER inline-line hydraulic filter element, sized 94 × 134 mm OD × length. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 94 × 134 mm
Thread 1 1/4-12 UNF-2B
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 94 mm |
| Length | 134 mm |
| Thread / connection | 1 1/4-12 UNF-2B |
| End caps | spin-on baseplate with attached gasket |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WD10013_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 94 mm (3.701 in) |
| Overall length | 134 mm (5.276 in) |
All 94×134 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 51611 | WIX Filters | partial | MANN-FILTER's online catalog lists 51611 (WIX) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 70101 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 70101 (CIM TEK) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 70102 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 70102 (CIM TEK) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 7L95P40 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 7 L95 P40 (EPPENSTEINER) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8014300 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 80.143.00 (UFI) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ BT526 | Baldwin Filters | partial | MANN-FILTER's online catalog lists BT526 (BALDWIN) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ DE25 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists DE25 (ZINGA) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FH60 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FH-60 (MOTORCRAFT) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC55230 page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC55230 (SAKURA) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6002 | Fleetguard | partial | MANN-FILTER's online catalog lists HF6002 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6002 | Fleetguard | partial | Fleetguard's online catalog lists WD10013 as an interchange for HF6002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HFR86002 page in verification queue | Fleetguard | partial | MANN-FILTER's online catalog lists HFR86002 (FLEETRITE) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ L1611 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists L1611 (KRALINATOR) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ LFH4970 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists LFH 4970 (LUBER-FINER) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P164348 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P164348 (DONALDSON) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P3398 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P3398 (FRAM) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SFH4348 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SFH4348 (SURE FILTER) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH56052 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 56052 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SPH11521 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SPH 11 521 (SCHUPP / SF FILTER) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGH6002 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WGH 6002 (WOODGATE) as a comparison number for WD10013. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the WD10013 model number is decoded
- WD10013MANN-FILTER hydraulic spin-on filter part number.
- 134 mmElement height (H).
- 94 mmOuter diameter (A).
- 1 1/4-12 UNF-2BSpin-on mounting thread.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the WD10013 filter element?
The published envelope is 94 mm OD × 134 mm length (3.701 × 5.276 in). Confirm against the housing drawing before ordering.
What replaces the WD10013 filter element?
20 partial match(es) requiring parameter review
How do I read the WD10013 part number?
See the designation decoder above: each segment of WD10013 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 3 catalog element(s) share the 94×134 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.