ElementRef

MANN-FILTER · HD / WD Hydraulic · inline line

HD7022X filter element: specifications & equivalents

The HD7022X is a MANN-FILTER inline-line hydraulic filter element, sized 70 × 303 mm OD × length (ID 40 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 70 × 303 mm
Inside diameter 40 mm
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.

Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.

Specification table

ParameterValue
Filter type inline line
Outside diameter OD 70 mm
Inside diameter ID 40 mm
Length 303 mm
End caps open-ended cartridge element
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. HD7022X_MANN-FILTER
Source catalog MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en)
Last verified2026-09-28

Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.

MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.

Dimensions & series range

Outside diameter70 mm (2.756 in)
Inside diameter40 mm (1.575 in)
Overall length303 mm (11.929 in)

All 70×303 mm interchange elements →

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ HHC29840VM
page in verification queue
AftermarketpartialMANN-FILTER's online catalog lists HHC29840VM (IKRON) as a comparison number for HD7022X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HHC29841VV
page in verification queue
AftermarketpartialMANN-FILTER's online catalog lists HHC29841VV (IKRON) as a comparison number for HD7022X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ MF1004A16HB
page in verification queue
AftermarketpartialMANN-FILTER's online catalog lists MF1004A16HB (MP FILTRI) as a comparison number for HD7022X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ MF1004A16HBP01
page in verification queue
AftermarketpartialMANN-FILTER's online catalog lists MF1004A16HBP01 (MP FILTRI) as a comparison number for HD7022X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SH93313
page in verification queue
AftermarketpartialMANN-FILTER's online catalog lists SH 93313 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for HD7022X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the HD7022X model number is decoded

  • HD7022XMANN-FILTER hydraulic cartridge element part number.
  • 303 mmElement height (H).
  • 70 mmOuter diameter (A).
  • 40 mmInner diameter (B).

Typical equipment & applications

  • Replacement element for OEM hydraulic filter housings

Selection pitfalls — read before you substitute

  • “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
  • Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
  • End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the HD7022X filter element?
The published envelope is 70 mm OD × 303 mm length with a 40 mm inside diameter (2.756 × 11.929 in × 1.575 in ID). Confirm against the housing drawing before ordering.
What replaces the HD7022X filter element?
5 partial match(es) requiring parameter review
How do I read the HD7022X part number?
See the designation decoder above: each segment of HD7022X encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Same-envelope elements from other brands

View full interchange →

These 2 catalog element(s) share the 70×303 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

HF29080 Fleetguard · 6.4 µm HD7021 MANN-FILTER

Other models in the HD / WD Hydraulic series

All 880 →
HD10001 103×482 mm HD10002 99×177 mm HD10004 99×141 mm HD10006 99×155 mm HD10007 99×218 mm HD10008 99×218 mm HD10011X 99×210 mm HD10012X 99×330 mm HD10013 100×438 mm HD10014 99×155 mm

Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.