MANN-FILTER · HD / WD Hydraulic · inline line
HD614 filter element: specifications & equivalents
The HD614 is a MANN-FILTER inline-line hydraulic filter element, sized 52 × 171 mm OD × length (ID 24 mm). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 52 × 171 mm
Inside diameter 24 mm
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 52 mm |
| Inside diameter ID | 24 mm |
| Length | 171 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HD614_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 52 mm (2.047 in) |
| Inside diameter | 24 mm (0.945 in) |
| Overall length | 171 mm (6.732 in) |
All 52×171 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0110R010BN3HC page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 0110 R 010 BN 3 HC (HYDAC) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 0110 R 010 BN4HC | HYDAC | partial | MANN-FILTER's online catalog lists 0110 R 010 BN 4 HC (HYDAC) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 0110R010BNHC page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 0110 R 010 BN HC (HYDAC) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 01262945 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 012 - 62/945 (HYDAC) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 02.0110 R.10VG.30.HC.S.P | Eaton / Internormen | partial | MANN-FILTER's online catalog lists 02.0110 R.10VG.30.HC.S.P (INTERNORMEN) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 322668 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 322668 (INTERNORMEN) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 8312400 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 83.124.00 (UFI) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H0110RN10 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists H 0110 RN10 (COMEX) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H0110RN2010 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists H 0110 RN 2 010 (COMEX) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ H110R10V page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists H110R10V (SEPARATION TECHNOLOGIES) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HC2208FKS6H page in verification queue | Pall | partial | MANN-FILTER's online catalog lists HC 2208 FKS6H (PALL) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF28652 | Fleetguard | partial | MANN-FILTER's online catalog lists HF28652 (FLEETGUARD/CUMMINS FILTRATION) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6885 | Fleetguard | partial | Fleetguard's online catalog lists HD614 as an interchange for HF6885. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY9131 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY 9131 (SCHUPP / SF FILTER) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MFH4927 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists MFH 4927 (PUROLATOR) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P170614 page in verification queue | Donaldson | partial | MANN-FILTER's online catalog lists P170614 (DONALDSON) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PR3258 | Parker | partial | MANN-FILTER's online catalog lists PR3258 (PARKER (PARKER HANNIFIN)) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ R0110A10NHA page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists R 0110 A10 NH A (FAI FILTRI) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RE030G10B2 page in verification queue | STAUFF | partial | MANN-FILTER's online catalog lists RE-030G10B/2 (STAUFF) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RHR110G10B page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists RHR110G10B (FILTREC) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SBF0110D010 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SBF0110D010 (SCHROEDER) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ST1253 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ST1253 (SEPARATION TECHNOLOGIES) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ST1254 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ST1254 (SEPARATION TECHNOLOGIES) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGHH11010RB page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WGHH11010RB (WOODGATE) as a comparison number for HD614. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HD614 model number is decoded
- HD614MANN-FILTER hydraulic cartridge element part number.
- 171 mmElement height (H).
- 52 mmOuter diameter (A).
- 24 mmInner diameter (B).
- 3Bypass valve opening pressure.
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HD614 filter element?
The published envelope is 52 mm OD × 171 mm length with a 24 mm inside diameter (2.047 × 6.732 in × 0.945 in ID). Confirm against the housing drawing before ordering.
What replaces the HD614 filter element?
24 partial match(es) requiring parameter review
How do I read the HD614 part number?
See the designation decoder above: each segment of HD614 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 3 catalog element(s) share the 52×171 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.