MANN-FILTER · HD / WD Hydraulic · inline line
HD58 filter element: specifications & equivalents
The HD58 is a MANN-FILTER inline-line hydraulic filter element, sized 45 × 113 mm OD × length (ID 26 mm). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 45 × 113 mm
Inside diameter 26 mm
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 45 mm |
| Inside diameter ID | 26 mm |
| Length | 113 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HD58_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 45 mm (1.772 in) |
| Inside diameter | 26 mm (1.024 in) |
| Overall length | 113 mm (4.449 in) |
All 45×113 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0485212625VGHREP page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 04.8521.26.25VG.HR.E.P (INTERNORMEN) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 1535226 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 1535226 (TRP DAF (TRUCK AND TRAILER)) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 306749 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 306749 (INTERNORMEN) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 30674925VG page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 306749/25VG (INTERNORMEN) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 7683246 page in verification queue | UFI | partial | MANN-FILTER's online catalog lists 768 3246 (MAHLE INDUSTRIEFILTER) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 852126SMXVST25 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 852 126 SMX VST25 (MAHLE INDUSTRIEFILTER) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 9650013155 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists 965 001 3155 (MAHLE INDUSTRIEFILTER) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ DMD126F20B page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists DMD126F20B (FILTREC) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FC8126A25HA page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists FC 8126 A25 HA (FAI FILTRI) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY15294 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY 15294 (SCHUPP / SF FILTER) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ M8126DH2025 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists M 8126 DH 2 025 (COMEX) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ M8126DH25 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists M 8126 DH25 (COMEX) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PR2895 page in verification queue | Parker | partial | MANN-FILTER's online catalog lists PR2895 (PARKER (PARKER HANNIFIN)) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23258-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists HD58 (MANN & HUMMEL) as replaced by Baldwin PT23258-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SL-010-F-20-B | STAUFF | partial | MANN-FILTER's online catalog lists SL-010F20B (STAUFF) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ST1676 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists ST1676 (SEPARATION TECHNOLOGIES) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WGH9842 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WGH9842 (WOODGATE) as a comparison number for HD58. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HD58 model number is decoded
- HD58MANN-FILTER hydraulic cartridge element part number.
- 113 mmElement height (H).
- 45 mmOuter diameter (A).
- 26 mmInner diameter (B).
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HD58 filter element?
The published envelope is 45 mm OD × 113 mm length with a 26 mm inside diameter (1.772 × 4.449 in × 1.024 in ID). Confirm against the housing drawing before ordering.
What replaces the HD58 filter element?
17 partial match(es) requiring parameter review
How do I read the HD58 part number?
See the designation decoder above: each segment of HD58 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 14 catalog element(s) share the 45×113 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
04.852 126.100G.HR.E.P 04.852 126.10VG.HR.E.P 04.852 126.25VG.16.E.P 04.852 126.3VG.HR.E.P 04.852126.60G.16.E.P HF29216 HF6369 HD55 HD55/1 HD55/2
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.