MANN-FILTER · HD / WD Hydraulic · inline line
HD14004 filter element: specifications & equivalents
The HD14004 is a MANN-FILTER inline-line hydraulic filter element, sized 140 × 400 mm OD × length (ID 70 mm). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 140 × 400 mm
Inside diameter 70 mm
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.92.
Dimensions and comparison numbers are taken from the MANN-FILTER online catalog API. Beta rating, collapse pressure and seal material vary by execution — verify against the current MANN data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Outside diameter OD | 140 mm |
| Inside diameter ID | 70 mm |
| Length | 400 mm |
| End caps | open-ended cartridge element |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HD14004_MANN-FILTER |
| Source catalog | MANN+HUMMEL / MANN-FILTER: MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) |
| Last verified | 2026-09-28 |
Sources: MANN+HUMMEL / MANN-FILTER — MANN-FILTER online product catalog GraphQL API (mann-filter.com, store pcat_mf_en_store_en) — accessed 2026-09-27.
MANN-FILTER® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized MANN-FILTER distributor.
Dimensions & series range
| Outside diameter | 140 mm (5.512 in) |
| Inside diameter | 70 mm (2.756 in) |
| Overall length | 400 mm (15.748 in) |
All 140×400 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ A21440DN2010 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists A 21440 DN 2010 (MAHLE INDUSTRIEFILTER) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HI307042 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HI3.07042 (F.B.N.) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY10374 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists HY 10374 (SCHUPP / SF FILTER) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ R671G10 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists R671G10 (FILTREC) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH52240 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists SH 52240 (HIFI-FILTER (JURA FILTRATION)) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ V2144026 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists V2.1440-26 (ARGO HYTOS) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ V2144026K8 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists V2.1440-26 K8 (ARGO HYTOS) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ WHY315328 page in verification queue | Aftermarket | partial | MANN-FILTER's online catalog lists WHY315328 (WISMET) as a comparison number for HD14004. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HD14004 model number is decoded
- HD14004MANN-FILTER hydraulic cartridge element part number.
- 400 mmElement height (H).
- 140 mmOuter diameter (A).
- 70 mmInner diameter (B).
Typical equipment & applications
- Replacement element for OEM hydraulic filter housings
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HD14004 filter element?
The published envelope is 140 mm OD × 400 mm length with a 70 mm inside diameter (5.512 × 15.748 in × 2.756 in ID). Confirm against the housing drawing before ordering.
What replaces the HD14004 filter element?
8 partial match(es) requiring parameter review
How do I read the HD14004 part number?
See the designation decoder above: each segment of HD14004 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 53 catalog element(s) share the 140×400 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
01.NR 1000.25API.10.B.N.IS07 01.NR 1000.32227.6VG.25G.25.B. V.-.S1 01.NR 630.10G.10.B.P.- 01.NR 630.10G.10.B.P.VA 01.NR 630.10P.10.B.P.- 01.NR 630.10VG.10.B.P.- 01.NR 630.10VG.10.B.P.IS06 01.NR 630.10VG.10.B.P.VA 01.NR 630.10VG.10.B.V.- 01.NR 630.10VG.10.B.V.IS06
Other models in the HD / WD Hydraulic series
All 880 →Reviewed & verified by the ElementRef engineering desk against MANN+HUMMEL / MANN-FILTER on 2026-09-28. Read our editorial & correction policy.