Fleetguard · HF Hydraulic · inline line

HF40021 filter element: specifications & equivalents

The HF40021 is a Fleetguard inline-line hydraulic filter element, sized 95.25 × 246.38 mm OD × length, rated at 16.3 µm absolute (16.3 µm at β75(c); 19 µm at β200(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 95.25 × 246.38 mm
Filtration rating 16.3 µm abs.
Beta rating 16.3 µm at β75(c); 19 µm at β200(c) per ISO 16889
Collapse / burst 10.342 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.

Specification table

ParameterValue
Filter type inline line
Filtration rating 16.3 µm
Rating basis absolute
Beta ratio 16.3 µm at β75(c); 19 µm at β200(c) per ISO 16889
Outside diameter OD 95.25 mm
Length 246.38 mm
End caps open-ended cartridge element
Rated flow 378.5 L/min
Collapse / burst pressure 10.342 bar
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. HF40021
Source catalog Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com)
Last verified2026-09-28

Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.

Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.

Dimensions & series range

Outside diameter95.25 mm (3.750 in)
Overall length246.38 mm (9.700 in)

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ 7621886
page in verification queue
UFIpartialFleetguard's online catalog lists 7621886 as an interchange for HF40021. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SBF937ELE9Z25B
page in verification queue
AftermarketpartialFleetguard's online catalog lists SBF937ELE9Z25B as an interchange for HF40021. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ WL10276
page in verification queue
AftermarketpartialFleetguard's online catalog lists WL10276 as an interchange for HF40021. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the HF40021 model number is decoded

  • HF40021Fleetguard HF-series hydraulic cartridge element part number.
  • 246.38 mmOverall height.
  • 95.25 mmLargest outside diameter.
  • 16.3 µm at β75(c); 19 µm at β200(c) per ISO 16889Published efficiency ratings.

Typical equipment & applications

  • Construction, agricultural and industrial hydraulic circuits
  • Mobile-equipment hydraulic return and pressure lines

Selection pitfalls — read before you substitute

  • “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
  • Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
  • End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the HF40021 filter element?
The published envelope is 95.25 mm OD × 246.38 mm length (3.750 × 9.700 in). Confirm against the housing drawing before ordering.
What micron rating does HF40021 use?
This element is rated 16.3 µm absolute — 16.3 µm at β75(c); 19 µm at β200(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF40021 filter element?
3 partial match(es) requiring parameter review
How do I read the HF40021 part number?
See the designation decoder above: each segment of HF40021 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Other models in the HF Hydraulic series

All 2621 →

Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.