Fleetguard · HF Hydraulic · inline line
HF35333 filter element: specifications & equivalents
The HF35333 is a Fleetguard inline-line hydraulic filter element, sized 93.5 × 200 mm OD × length (ID 47.5 mm), rated at 10 µm absolute (10 µm at β75(c); 11 µm at β200(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 10 µm |
| Rating basis | absolute |
| Beta ratio | 10 µm at β75(c); 11 µm at β200(c) per ISO 16889 |
| Outside diameter OD | 93.5 mm |
| Inside diameter ID | 47.5 mm |
| Length | 200 mm |
| End caps | open-ended cartridge element |
| Rated flow | 55 L/min |
| Collapse / burst pressure | 20 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35333 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 93.5 mm (3.681 in) |
| Inside diameter | 47.5 mm (1.870 in) |
| Overall length | 200 mm (7.874 in) |
All 94×200 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 9216890007 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 9216890007 as an interchange for HF35333. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ D03B25GAV page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists D03B25GAV as an interchange for HF35333. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ GO4649 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists GO4649 as an interchange for HF35333. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY19136 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HY19136 as an interchange for HF35333. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ PPR31825GV page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists PPR31825GV as an interchange for HF35333. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9450-MPG | Baldwin Filters | partial | Fleetguard's online catalog lists PT9450MPG as an interchange for HF35333. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9450-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists HF35333 (FLEETGUARD) as replaced by Baldwin PT9450-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35333 model number is decoded
- HF35333Fleetguard HF-series hydraulic cartridge element part number.
- 200 mmOverall height.
- 93.5 mmLargest outside diameter.
- 47.5 mmLargest end inside diameter.
- 10 µm at β75(c); 11 µm at β200(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35333 filter element?
What micron rating does HF35333 use?
What replaces the HF35333 filter element?
How do I read the HF35333 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Same-envelope elements from other brands
View full interchange →These 4 catalog element(s) share the 94×200 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.