Fleetguard · HF Hydraulic · inline line
HF35126 filter element: specifications & equivalents
The HF35126 is a Fleetguard inline-line hydraulic filter element, sized 106 × 465 mm OD × length (ID 72 mm), rated at 6 µm absolute (6 µm at β75(c); 8 µm at β200(c) per ISO 16889). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 106 × 465 mm
Inside diameter 72 mm
Filtration rating 6 µm abs.
Beta rating 6 µm at β75(c); 8 µm at β200(c) per ISO 16889
Collapse / burst 8 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Filtration rating | 6 µm |
| Rating basis | absolute |
| Beta ratio | 6 µm at β75(c); 8 µm at β200(c) per ISO 16889 |
| Outside diameter OD | 106 mm |
| Inside diameter ID | 72 mm |
| Length | 465 mm |
| End caps | open-ended cartridge element |
| Rated flow | 300 L/min |
| Collapse / burst pressure | 8 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | HF35126 |
| Source catalog | Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com) |
| Last verified | 2026-09-28 |
Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.
Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.
Dimensions & series range
| Outside diameter | 106 mm (4.173 in) |
| Inside diameter | 72 mm (2.835 in) |
| Overall length | 465 mm (18.307 in) |
All 106×465 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 2268253 page in verification queue | UFI | partial | Fleetguard's online catalog lists 2268253 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 510011016 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 510011016 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ 57231 | WIX Filters | partial | Fleetguard's online catalog lists 57231 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 750711001 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 750711001 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 7631899 page in verification queue | UFI | partial | Fleetguard's online catalog lists 7631899 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 937760Q page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 937760Q as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ 94735 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists 94735 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ CRC240FC1 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists CRC240FC1 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ ER151B4C05 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists ER151B4C05 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ FT2504A06A page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists FT2504A06A as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HPTX2L186MB page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HPTX2L186MB as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ HY24310 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists HY24310 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MF0063493 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists MF0063493 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ MR2504A06A page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists MR2504A06A as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P174570 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P174570 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ P763014 page in verification queue | Donaldson | partial | Fleetguard's online catalog lists P763014 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23232-MPG | Baldwin Filters | partial | Fleetguard's online catalog lists PT23232MPG as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23232-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists HF35126 (FLEETGUARD) as replaced by Baldwin PT23232-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ R722G06 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists R722G06 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ RA-300-E-05-B | STAUFF | partial | STAUFF Filter Interchange lists HF 35126 (FLEETGUARD / CUMMINS) as replaced by RA-300-E-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
|
↔ RC240FC1 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists RC240FC1 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RFC720186GB page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists RFC720186GB as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ RFC720186GV page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists RFC720186GV as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF75071101Z5B | Schroeder Industries | partial | Fleetguard's online catalog lists SBF75071101Z5B as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SFTXW2186UM page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SFTXW2186UM as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ SH53135 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists SH53135 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ TXW5A5B page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists TXW5A5B as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ TXW5ACC6 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists TXW5ACC6 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ TXW5AGDL6 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists TXW5AGDL6 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
|
↔ VR151B3C05 page in verification queue | Aftermarket | partial | Fleetguard's online catalog lists VR151B3C05 as an interchange for HF35126. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the HF35126 model number is decoded
- HF35126Fleetguard HF-series hydraulic cartridge element part number.
- 465 mmOverall height.
- 106 mmLargest outside diameter.
- 72 mmLargest end inside diameter.
- 6 µm at β75(c); 8 µm at β200(c) per ISO 16889Published efficiency ratings.
Typical equipment & applications
- Construction, agricultural and industrial hydraulic circuits
- Mobile-equipment hydraulic return and pressure lines
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the HF35126 filter element?
The published envelope is 106 mm OD × 465 mm length with a 72 mm inside diameter (4.173 × 18.307 in × 2.835 in ID). Confirm against the housing drawing before ordering.
What micron rating does HF35126 use?
This element is rated 6 µm absolute — 6 µm at β75(c); 8 µm at β200(c) per ISO 16889. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the HF35126 filter element?
30 partial match(es) requiring parameter review
How do I read the HF35126 part number?
See the designation decoder above: each segment of HF35126 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 13 catalog element(s) share the 106×465 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
HF29241 HF29242 HF35127 HF6309 HF7961 HD11013 RA-300-E-03-B RA-300-E-05-B RA-300-E-10-B RA-300-E-20-B
Other models in the HF Hydraulic series
All 2621 →Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.