Fleetguard · HF Hydraulic · inline line

HF29200 filter element: specifications & equivalents

Q: What are the dimensions of the HF29200 filter element?

The published envelope is 72 mm OD × 124.2 mm length with a 27.9 mm inside diameter (2.835 × 4.890 in × 1.098 in ID). Confirm against the housing drawing before ordering.

The HF29200 is a Fleetguard inline-line hydraulic filter element, built with microglass media, sized 72 × 124.2 mm OD × length (ID 27.9 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 72 × 124.2 mm

Inside diameter 27.9 mm

Beta rating 11.5 µm at β200(c); 15 µm at β1000(c) per ISO 16889

Media Microglass

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.

Specifications and cross-references are taken from the Fleetguard online catalog API. Where both TWA and Beta ratings are published the conventions differ — verify cleanliness targets, collapse rating and seal configuration against the current Fleetguard data sheet before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	Microglass
Beta ratio	11.5 µm at β200(c); 15 µm at β1000(c) per ISO 16889
Outside diameter OD	72 mm
Inside diameter ID	27.9 mm
Length	124.2 mm
End caps	open-ended cartridge element
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	HF29200
Source catalog	Cummins Filtration / Fleetguard: Fleetguard online product catalog (fleetguard.com)
Last verified	2026-09-28

Sources: Cummins Filtration / Fleetguard — Fleetguard online product catalog (fleetguard.com) — accessed 2026-09-28.

Fleetguard® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Fleetguard distributor.

Dimensions & series range

Outside diameter	72 mm (2.835 in)
Inside diameter	27.9 mm (1.098 in)
Overall length	124.2 mm (4.890 in)

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 6692337 page in verification queue	UFI	partial	Fleetguard's online catalog lists 6692337 as an interchange for HF29200. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ H88110 page in verification queue	Aftermarket	partial	Fleetguard's online catalog lists H88110 as an interchange for HF29200. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HY90632 page in verification queue	Aftermarket	partial	Fleetguard's online catalog lists HY90632 as an interchange for HF29200. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ P575347 page in verification queue	Donaldson	partial	Fleetguard's online catalog lists P575347 as an interchange for HF29200. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SH51504 page in verification queue	Aftermarket	partial	Fleetguard's online catalog lists SH51504 as an interchange for HF29200. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the HF29200 model number is decoded

HF29200Fleetguard HF-series hydraulic cartridge element part number.
124.2 mmOverall height.
72 mmLargest outside diameter.
27.9 mmLargest end inside diameter.
11.5 µm at β200(c); 15 µm at β1000(c) per ISO 16889Published efficiency ratings.

Typical equipment & applications

Construction, agricultural and industrial hydraulic circuits
Mobile-equipment hydraulic return and pressure lines

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.

Frequently asked questions

What are the dimensions of the HF29200 filter element?

The published envelope is 72 mm OD × 124.2 mm length with a 27.9 mm inside diameter (2.835 × 4.890 in × 1.098 in ID). Confirm against the housing drawing before ordering.

What replaces the HF29200 filter element?

5 partial match(es) requiring parameter review

How do I read the HF29200 part number?

See the designation decoder above: each segment of HF29200 encodes size, line type, filtration grade and media/collapse execution.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

How often should a hydraulic return-line element be replaced?

Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.

Other models in the HF Hydraulic series

All 2621 →

HF28084 HF28086 HF28088 HF28201 HF28202 97×247 mm HF28652 HF28658 95×193 mm HF28660 HF28662 HF28667

Reviewed & verified by the ElementRef engineering desk against Cummins Filtration / Fleetguard on 2026-09-28. Read our editorial & correction policy.