Filtrec · Filtrec elements · inline line

XD250C10A filter element: specifications & equivalents

Q: What are the dimensions of the XD250C10A filter element?

The published envelope is 78 mm OD × 248 mm length with a 40.5 mm inside diameter (3.071 × 9.764 in × 1.594 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does XD250C10A use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The XD250C10A is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 78 × 248 mm OD × length (ID 40.5 mm), rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 78 × 248 mm

Inside diameter 40.5 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	78 mm
Inside diameter ID	40.5 mm
Length	248 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	XD250C10A
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	78 mm (3.071 in)
Inside diameter	40.5 mm (1.594 in)
Overall length	248 mm (9.764 in)

All 78×248 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 20250P10A000M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps REXROTH 2.0250P10A000M to FILTREC XD250C10A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 20250P10A000P page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps EPPENSTEINER 2.0250P10A000P to FILTREC XD250C10A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CFDN0250P10NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CFDN0250P10NA to FILTREC XD250C10A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ DN025P10ANP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI DN025P10ANP01 to FILTREC XD250C10A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ NL-250-K-10-B	STAUFF	partial	STAUFF Filter Interchange lists XD250C10A (FILTREC) as replaced by NL-250-K-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the XD250C10A model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (XD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the XD250C10A filter element?

The published envelope is 78 mm OD × 248 mm length with a 40.5 mm inside diameter (3.071 × 9.764 in × 1.594 in ID). Confirm against the housing drawing before ordering.

What micron rating does XD250C10A use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the XD250C10A filter element?

4 catalog-confirmed full match(es) (20250P10A000M, 20250P10A000P, CFDN0250P10NA…); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 90 catalog element(s) share the 78×248 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R7.0825-06K1 ARGO-HYTOS · 10 µm R7.0825-08K1 ARGO-HYTOS · 16 µm DVD20030F10B Filtrec · 12 µm DVD20030F20B Filtrec · 22 µm XD250C10AV Filtrec · 10 µm XD250C25A Filtrec · 25 µm XD250C25AV Filtrec · 25 µm XD250G01A Filtrec · 4 µm XD250G01B Filtrec · 4 µm XD250G03A Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 19/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.