Filtrec · Filtrec elements · inline line
WG654 filter element: specifications & equivalents
The WG654 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 90 × 232 mm OD × length (ID 58 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 22 µm |
| Rating basis | absolute |
| Beta ratio | β22(c)≥1000 |
| Outside diameter OD | 90 mm |
| Inside diameter ID | 58 mm |
| Length | 232 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WG654 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 90 mm (3.543 in) |
| Inside diameter | 58 mm (2.283 in) |
| Overall length | 232 mm (9.134 in) |
All 90×232 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ HD9007 | MANN-FILTER | partial | MANN-FILTER's online catalog lists WG654 (FILTREC) as a comparison number for HD9007. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23257-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists WG654 (FILTREC) as replaced by Baldwin PT23257-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the WG654 model number is decoded
- G25Filtrec internal media grade code (glassfiber, 22 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (WG family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the WG654 filter element?
What micron rating does WG654 use?
What replaces the WG654 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 1 catalog element(s) share the 90×232 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 18/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.