Filtrec · Filtrec elements · inline line
WG582 filter element: specifications & equivalents
The WG582 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 132 × 400 mm OD × length (ID 75 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 12 µm |
| Rating basis | absolute |
| Beta ratio | β12(c)≥1000 |
| Outside diameter OD | 132 mm |
| Inside diameter ID | 75 mm |
| Length | 400 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WG582 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 132 mm (5.197 in) |
| Inside diameter | 75 mm (2.953 in) |
| Overall length | 400 mm (15.748 in) |
All 132×400 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ V5124006 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps ARGO-HYTOS V5124006 to FILTREC WG582 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ V5124006K page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps ARGO-HYTOS V5124006K to FILTREC WG582 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ V5124006K1 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps ARGO-HYTOS V5124006K1 to FILTREC WG582 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ V5124006K2 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps ARGO-HYTOS V5124006K2 to FILTREC WG582 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ V5124006K3 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps ARGO-HYTOS V5124006K3 to FILTREC WG582 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ V5124006K4 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps ARGO-HYTOS V5124006K4 to FILTREC WG582 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HD13114 | MANN-FILTER | partial | MANN-FILTER's online catalog lists WG582 (FILTREC) as a comparison number for HD13114. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF35328 | Fleetguard | partial | Fleetguard's online catalog lists WG582 as an interchange for HF35328. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23245-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists WG582 (FILTREC) as replaced by Baldwin PT23245-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the WG582 model number is decoded
- G10Filtrec internal media grade code (glassfiber, 12 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (WG family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the WG582 filter element?
What micron rating does WG582 use?
What replaces the WG582 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 3 catalog element(s) share the 132×400 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 18/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.