Filtrec · Filtrec elements · inline line
WG570 filter element: specifications & equivalents
The WG570 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 73 × 318 mm OD × length (ID 35 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 12 µm |
| Rating basis | absolute |
| Beta ratio | β12(c)≥1000 |
| Outside diameter OD | 73 mm |
| Inside diameter ID | 35 mm |
| Length | 318 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | WG570 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 73 mm (2.874 in) |
| Inside diameter | 35 mm (1.378 in) |
| Overall length | 318 mm (12.520 in) |
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 14510898 page in verification queue | UFI | full | Filtrec's official Cross Navigator maps VOLVO 14510898 to FILTREC WG570 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF29212 | Fleetguard | partial | Fleetguard's online catalog lists WG570 as an interchange for HF29212. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9519-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists WG570 (FILTREC) as replaced by Baldwin PT9519-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the WG570 model number is decoded
- G10Filtrec internal media grade code (glassfiber, 12 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (WG family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the WG570 filter element?
What micron rating does WG570 use?
What replaces the WG570 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Other models in the Filtrec elements series
All 9874 (list page 18/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.