Filtrec · Filtrec elements · inline line

RVR85E10B filter element: specifications & equivalents

Q: What are the dimensions of the RVR85E10B filter element?

The published envelope is 74 mm OD × 172 mm length with a 30 mm inside diameter (2.913 × 6.772 in × 1.181 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does RVR85E10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The RVR85E10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 74 × 172 mm OD × length (ID 30 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 74 × 172 mm

Inside diameter 30 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	74 mm
Inside diameter ID	30 mm
Length	172 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RVR85E10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	74 mm (2.913 in)
Inside diameter	30 mm (1.181 in)
Overall length	172 mm (6.772 in)

All 74×172 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 85K10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps EPPENSTEINER 85K10 to FILTREC RVR85E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ DL85K10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps EPPENSTEINER DL85K10 to FILTREC RVR85E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ LS-020-E-10-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF LS020E10B to FILTREC RVR85E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RVR85E10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RVR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the RVR85E10B filter element?

The published envelope is 74 mm OD × 172 mm length with a 30 mm inside diameter (2.913 × 6.772 in × 1.181 in ID). Confirm against the housing drawing before ordering.

What micron rating does RVR85E10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the RVR85E10B filter element?

3 catalog-confirmed full match(es) (85K10, DL85K10, LS-020-E-10-B)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 35 catalog element(s) share the 74×172 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RVR85A05B Filtrec RVR85A10B Filtrec RVR85B100B Filtrec · 100 µm RVR85B10B Filtrec · 10 µm RVR85B25B Filtrec · 25 µm RVR85B40B Filtrec · 40 µm RVR85B60B Filtrec · 60 µm RVR85E03B Filtrec · 5 µm RVR85E20B Filtrec · 22 µm RVR85K10B Filtrec · 10 µm

Other models in the Filtrec elements series

All 9874 (list page 17/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.