Filtrec · Filtrec elements · inline line

RVR10005K10V filter element: specifications & equivalents

Q: What are the dimensions of the RVR10005K10V filter element?

The published envelope is 60 mm OD × 100 mm length with a 34.2 mm inside diameter (2.362 × 3.937 in × 1.346 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does RVR10005K10V use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The RVR10005K10V is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 60 × 100 mm OD × length (ID 34.2 mm), rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 60 × 100 mm

Inside diameter 34.2 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	60 mm
Inside diameter ID	34.2 mm
Length	100 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RVR10005K10V
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	60 mm (2.362 in)
Inside diameter	34.2 mm (1.346 in)
Overall length	100 mm (3.937 in)

All 60×100 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 10005P10A000V page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps REXROTH 1.0005P10A000V to FILTREC RVR10005K10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ REP10005410PV page in verification queue	STAUFF	full	Filtrec's official Cross Navigator maps NATIONAL FILTERS REP10005410PV to FILTREC RVR10005K10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RVR10005K10V model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RVR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the RVR10005K10V filter element?

The published envelope is 60 mm OD × 100 mm length with a 34.2 mm inside diameter (2.362 × 3.937 in × 1.346 in ID). Confirm against the housing drawing before ordering.

What micron rating does RVR10005K10V use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the RVR10005K10V filter element?

2 catalog-confirmed full match(es) (10005P10A000V, REP10005410PV)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 14 catalog element(s) share the 60×100 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

01.NR 40.10VG.10.B.P.- Eaton / Internormen · 10 µm 01.NR 40.25VG.10.B.P.- Eaton / Internormen · 20 µm 01.NR 63.3VG.10.B.P.- Eaton / Internormen · 5 µm RVR10005A10B Filtrec RVR10005B10V Filtrec RVR10005B25V Filtrec · 25 µm RVR10005E03V Filtrec · 5 µm RVR10005E05V Filtrec · 7 µm RVR10005E10V Filtrec · 12 µm RVR10005E20V Filtrec · 22 µm

Other models in the Filtrec elements series

All 9874 (list page 16/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.