Filtrec · Filtrec elements · inline line

RHR2700M10B0/AB1 filter element: specifications & equivalents

Q: What are the dimensions of the RHR2700M10B0/AB1 filter element?

The published envelope is 224 mm OD × 481.5 mm length with a 175.2 mm inside diameter (8.819 × 18.957 in × 6.898 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does RHR2700M10B0/AB1 use?

This element is rated 15 µm absolute — β15(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The RHR2700M10B0/AB1 is a Filtrec inline-line hydraulic filter element, built with synthetic media, sized 224 × 481.5 mm OD × length (ID 175.2 mm), rated at 15 µm absolute (β15(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 224 × 481.5 mm

Inside diameter 175.2 mm

Filtration rating 15 µm abs.

Beta rating β 15(c)≥1000

Media synthetic

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	synthetic
Filtration rating	15 µm
Rating basis	absolute
Beta ratio	β15(c)≥1000
Outside diameter OD	224 mm
Inside diameter ID	175.2 mm
Length	481.5 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RHR2700M10B0/AB1
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	224 mm (8.819 in)
Inside diameter	175.2 mm (6.898 in)
Overall length	481.5 mm (18.957 in)

All 224×482 mm interchange elements →

Cross references & equivalents

No catalog-verified cross references yet. This model is in the manual verification queue — request a verified equivalent.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RHR2700M10B0/AB1 model number is decoded

M10Filtrec internal media grade code (synthetic, 15 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RHR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the RHR2700M10B0/AB1 filter element?

The published envelope is 224 mm OD × 481.5 mm length with a 175.2 mm inside diameter (8.819 × 18.957 in × 6.898 in ID). Confirm against the housing drawing before ordering.

What micron rating does RHR2700M10B0/AB1 use?

This element is rated 15 µm absolute — β15(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the RHR2700M10B0/AB1 filter element?

Cross references are being verified for this model — use the inquiry form and the engineering desk will confirm equivalents.

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 1 catalog element(s) share the 224×482 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RHR2700M10V0/AB1 Filtrec · 15 µm

Other models in the Filtrec elements series

All 9874 (list page 14/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.