Filtrec · Filtrec elements · inline line

RHR185M15B/ESD filter element: specifications & equivalents

Q: What are the dimensions of the RHR185M15B/ESD filter element?

The published envelope is 60 mm OD × 295 mm length with a 34 mm inside diameter (2.362 × 11.614 in × 1.339 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does RHR185M15B/ESD use?

This element is rated 20 µm absolute — β20(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The RHR185M15B/ESD is a Filtrec inline-line hydraulic filter element, built with synthetic media, sized 60 × 295 mm OD × length (ID 34 mm), rated at 20 µm absolute (β20(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 60 × 295 mm

Inside diameter 34 mm

Filtration rating 20 µm abs.

Beta rating β 20(c)≥1000

Media synthetic

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	synthetic
Filtration rating	20 µm
Rating basis	absolute
Beta ratio	β20(c)≥1000
Outside diameter OD	60 mm
Inside diameter ID	34 mm
Length	295 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RHR185M15B/ESD
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	60 mm (2.362 in)
Inside diameter	34 mm (1.339 in)
Overall length	295 mm (11.614 in)

All 60×295 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 0185R015MMSFREE page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 0185R015MMSFREE to FILTREC RHR185M15B/ESD as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RHR185M15B/ESD model number is decoded

M15Filtrec internal media grade code (synthetic, 20 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RHR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the RHR185M15B/ESD filter element?

The published envelope is 60 mm OD × 295 mm length with a 34 mm inside diameter (2.362 × 11.614 in × 1.339 in ID). Confirm against the housing drawing before ordering.

What micron rating does RHR185M15B/ESD use?

This element is rated 20 µm absolute — β20(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the RHR185M15B/ESD filter element?

1 catalog-confirmed full match(es) (0185R015MMSFREE)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 23 catalog element(s) share the 60×295 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RHR185G10V Filtrec · 12 µm RHR185M10B Filtrec · 15 µm RHR185M10B/2 Filtrec · 15 µm RHR185M10B/ESD Filtrec · 15 µm RHR185M10V Filtrec · 15 µm RHR185M15B Filtrec · 20 µm RHR185M15B/2 Filtrec · 20 µm RHR185M15V Filtrec · 20 µm RHR185N10B Filtrec · 10 µm RE-052-G-03-B STAUFF

Other models in the Filtrec elements series

All 9874 (list page 13/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.