Filtrec · Filtrec elements · inline line
RHR1300G03V0/009 filter element: specifications & equivalents
The RHR1300G03V0/009 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 143.5 × 483 mm OD × length (ID 91.2 mm), rated at 5 µm absolute (β5(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 5 µm |
| Rating basis | absolute |
| Beta ratio | β5(c)≥1000 |
| Outside diameter OD | 143.5 mm |
| Inside diameter ID | 91.2 mm |
| Length | 483 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | RHR1300G03V0/009 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 143.5 mm (5.650 in) |
| Inside diameter | 91.2 mm (3.591 in) |
| Overall length | 483 mm (19.016 in) |
All 144×483 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 1300R003BN4HCVKBQPG5 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 1300R003BN4HCVKBQPG5 to FILTREC RHR1300G03V0/009 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 1300R003ONVKBQPG5 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 1300R003ONVKBQPG5 to FILTREC RHR1300G03V0/009 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the RHR1300G03V0/009 model number is decoded
- G03Filtrec internal media grade code (glassfiber, 5 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (RHR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
Frequently asked questions
What are the dimensions of the RHR1300G03V0/009 filter element?
What micron rating does RHR1300G03V0/009 use?
What replaces the RHR1300G03V0/009 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 174 catalog element(s) share the 144×483 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 13/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.