Filtrec · Filtrec elements · inline line

RHR1300A05B filter element: specifications & equivalents

Q: What are the dimensions of the RHR1300A05B filter element?

The published envelope is 124.5 mm OD × 483 mm length with a 96.5 mm inside diameter (4.902 × 19.016 in × 3.799 in ID). Confirm against the housing drawing before ordering.

The RHR1300A05B is a Filtrec inline-line hydraulic filter element, sized 124.5 × 483 mm OD × length (ID 96.5 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 124.5 × 483 mm

Inside diameter 96.5 mm

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	124.5 mm
Inside diameter ID	96.5 mm
Length	483 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RHR1300A05B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	124.5 mm (4.902 in)
Inside diameter	96.5 mm (3.799 in)
Overall length	483 mm (19.016 in)

All 125×483 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ RE300A05B4 page in verification queue	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF RE300A05B4 to FILTREC RHR1300A05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ RE-300-A-05-B	STAUFF	partial	STAUFF Filter Interchange lists RHR1300A05B (FILTREC) as replaced by RE-300-A-05-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RHR1300A05B model number is decoded

A06Filtrec internal media grade code (media).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RHR family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Frequently asked questions

What are the dimensions of the RHR1300A05B filter element?

The published envelope is 124.5 mm OD × 483 mm length with a 96.5 mm inside diameter (4.902 × 19.016 in × 3.799 in ID). Confirm against the housing drawing before ordering.

What replaces the RHR1300A05B filter element?

1 catalog-confirmed full match(es) (RE300A05B4); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 48 catalog element(s) share the 125×483 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

RHR1300A03B Filtrec RHR1300A10B Filtrec RHR1300A10B/5 Filtrec RHR1300A10V Filtrec RHR1300A20B Filtrec RHR1300B100B Filtrec · 100 µm RHR1300B25B Filtrec · 25 µm RHR1300D10B * Filtrec · 10 µm RHR1300D10B/5 Filtrec · 10 µm RHR1300S100B/8 Filtrec · 100 µm

Other models in the Filtrec elements series

All 9874 (list page 12/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.