Filtrec · Filtrec elements · inline line

RHK800M10V filter element: specifications & equivalents

Q: What are the dimensions of the RHK800M10V filter element?

The published envelope is 114 mm OD × 398 mm length with a 68.5 mm inside diameter (4.488 × 15.669 in × 2.697 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does RHK800M10V use?

This element is rated 15 µm absolute — β15(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The RHK800M10V is a Filtrec inline-line hydraulic filter element, built with synthetic media, sized 114 × 398 mm OD × length (ID 68.5 mm), rated at 15 µm absolute (β15(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 114 × 398 mm

Inside diameter 68.5 mm

Filtration rating 15 µm abs.

Beta rating β 15(c)≥1000

Media synthetic

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	synthetic
Filtration rating	15 µm
Rating basis	absolute
Beta ratio	β15(c)≥1000
Outside diameter OD	114 mm
Inside diameter ID	68.5 mm
Length	398 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RHK800M10V
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	114 mm (4.488 in)
Inside diameter	68.5 mm (2.697 in)
Overall length	398 mm (15.669 in)

All 114×398 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 0800RK010MMV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 0800RK010MMV to FILTREC RHK800M10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ RK0800A10MMV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI RK0800A10MMV to FILTREC RHK800M10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RHK800M10V model number is decoded

M10Filtrec internal media grade code (synthetic, 15 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RHK family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the RHK800M10V filter element?

The published envelope is 114 mm OD × 398 mm length with a 68.5 mm inside diameter (4.488 × 15.669 in × 2.697 in ID). Confirm against the housing drawing before ordering.

What micron rating does RHK800M10V use?

This element is rated 15 µm absolute — β15(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the RHK800M10V filter element?

2 catalog-confirmed full match(es) (0800RK010MMV, RK0800A10MMV)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 10 catalog element(s) share the 114×398 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R2.1240-06K1 ARGO-HYTOS · 10 µm RHK800G10B Filtrec · 12 µm RHK800G10V Filtrec · 12 µm RHK800M10B Filtrec · 15 µm RHK800M10B/ESD Filtrec · 15 µm RHK800M10V/ESD Filtrec · 15 µm RHK800M15B Filtrec · 20 µm RHK800M15B/ESD Filtrec · 20 µm RHK800M15V Filtrec · 20 µm RHK800M15V/ESD Filtrec · 20 µm

Other models in the Filtrec elements series

All 9874 (list page 12/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.