Filtrec · Filtrec elements · inline line

RHK201M15B filter element: specifications & equivalents

Q: What are the dimensions of the RHK201M15B filter element?

The published envelope is 88 mm OD × 328 mm length with a 40.2 mm inside diameter (3.465 × 12.913 in × 1.583 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does RHK201M15B use?

This element is rated 20 µm absolute — β20(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The RHK201M15B is a Filtrec inline-line hydraulic filter element, built with synthetic media, sized 88 × 328 mm OD × length (ID 40.2 mm), rated at 20 µm absolute (β20(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 88 × 328 mm

Inside diameter 40.2 mm

Filtration rating 20 µm abs.

Beta rating β 20(c)≥1000

Media synthetic

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	synthetic
Filtration rating	20 µm
Rating basis	absolute
Beta ratio	β20(c)≥1000
Outside diameter OD	88 mm
Inside diameter ID	40.2 mm
Length	328 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	RHK201M15B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	88 mm (3.465 in)
Inside diameter	40.2 mm (1.583 in)
Overall length	328 mm (12.913 in)

All 88×328 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 0201 RK 015 MM	HYDAC	partial	Filtrec's official Cross Navigator maps HYDAC 0201RK015MM to FILTREC RHK201M15B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (15 vs 20 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the RHK201M15B model number is decoded

M15Filtrec internal media grade code (synthetic, 20 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (RHK family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the RHK201M15B filter element?

The published envelope is 88 mm OD × 328 mm length with a 40.2 mm inside diameter (3.465 × 12.913 in × 1.583 in ID). Confirm against the housing drawing before ordering.

What micron rating does RHK201M15B use?

This element is rated 20 µm absolute — β20(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the RHK201M15B filter element?

1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 22 catalog element(s) share the 88×328 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R2.0933-03K1 ARGO-HYTOS · 5 µm R2.0933-06K1 ARGO-HYTOS · 10 µm R2.0933-08K1 ARGO-HYTOS · 16 µm RHK201G10B Filtrec · 12 µm RHK201G10V Filtrec · 12 µm RHK201M10B Filtrec · 15 µm RHK201M10B/ESD Filtrec · 15 µm RHK201M10V Filtrec · 15 µm RHK201M10V/ESD Filtrec · 15 µm RHK201M15B/ESD Filtrec · 20 µm

Other models in the Filtrec elements series

All 9874 (list page 12/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.