Filtrec · Filtrec elements · inline line

R240T10 filter element: specifications & equivalents

Q: What are the dimensions of the R240T10 filter element?

The published envelope is 99 mm OD × 124 mm length with a 51.5 mm inside diameter (3.898 × 4.882 in × 2.028 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does R240T10 use?

This element is rated 10 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The R240T10 is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 99 × 124 mm OD × length (ID 51.5 mm), rated at 10 µm class. Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 99 × 124 mm

Inside diameter 51.5 mm

Filtration rating 10 µm nom.

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Filtration rating	10 µm
Rating basis	nominal
Outside diameter OD	99 mm
Inside diameter ID	51.5 mm
Length	124 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	R240T10
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	99 mm (3.898 in)
Inside diameter	51.5 mm (2.028 in)
Overall length	124 mm (4.882 in)

All 99×124 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ CU200M10N	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI CU200M10N to FILTREC R240T10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FBH20M10M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FBN FBH20M10M to FILTREC R240T10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ MU200M10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI MU200M10 to FILTREC R240T10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the R240T10 model number is decoded

T10Filtrec internal media grade code (wire-mesh, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (R family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the R240T10 filter element?

The published envelope is 99 mm OD × 124 mm length with a 51.5 mm inside diameter (3.898 × 4.882 in × 2.028 in ID). Confirm against the housing drawing before ordering.

What micron rating does R240T10 use?

This element is rated 10 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the R240T10 filter element?

3 catalog-confirmed full match(es) (CU200M10N, FBH20M10M, MU200M10)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 4 catalog element(s) share the 99×124 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R240C10 Filtrec · 10 µm R240C25 Filtrec · 25 µm R240G10 Filtrec · 12 µm R240G25 Filtrec · 22 µm

Other models in the Filtrec elements series

All 9874 (list page 9/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.