Filtrec · Filtrec elements · inline line

DVD218E10B filter element: specifications & equivalents

The DVD218E10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 43 × 53 mm OD × length (ID 18.2 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 43 × 53 mm
Inside diameter 18.2 mm
Filtration rating 12 µm abs.
Beta rating β 12(c)≥1000
Media glassfiber
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

ParameterValue
Filter type inline line
Media glassfiber
Filtration rating 12 µm
Rating basis absolute
Beta ratio β12(c)≥1000
Outside diameter OD 43 mm
Inside diameter ID 18.2 mm
Length 53 mm
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. DVD218E10B
Source catalog Filtrec S.p.A.: Filtrec Cross Navigator
Last verified2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

DVD218E10B — FILTER ELEMENTFiltrec · Filtrec elements · inline line · dimensional reference drawingFRONT VIEWTOP VIEW53 mmØ43 mmØ43Ø18.2 boreTECHNICAL DATAElement typeinline lineMediaglassfiberRating12 µm absoluteBeta ratioβ12(c)≥1000Outside dia. OD43 mmInside dia. ID18.2 mmLength53 mmFiltrec S.p.A. — Filtrec Cross Navigator, accessed 2026-10-03NOTES1. Dimensions in millimetres, nominal values as cited in the source line above; manufacturing tolerances and interface details per the manufacturer data sheet.2. Schematic section derived from catalog data — not a manufacturer drawing. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.3. ElementRef is an independent reference database; not affiliated with, authorised or endorsed by Filtrec.ELEMENTREF · DVD218E10BDWG NO.ER-DVD218E10B-DWG-01DATA DATE2026-10-03SCALE1.9:1REV.A
Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter43 mm (1.693 in)
Inside diameter18.2 mm (0.717 in)
Overall length53 mm (2.087 in)

All 43×53 mm interchange elements →

Cross references & equivalents

Equivalent modelBrandMatch levelNote
↔ 218K10P
page in verification queue
AftermarketfullFiltrec's official Cross Navigator maps EPPENSTEINER 2.18K10P to FILTREC DVD218E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF218A10NA
page in verification queue
AftermarketfullFiltrec's official Cross Navigator maps FAI FILTRI CF218A10NA to FILTREC DVD218E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SS-004-E-10-BSTAUFFpartialSTAUFF Filter Interchange lists DVD218E10B (FILTREC) as replaced by SS-004-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DVD218E10B model number is decoded

  • G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

  • Filtrec aftermarket replacement hydraulic/lube filter element (DVD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

  • “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DVD218E10B filter element?
The published envelope is 43 mm OD × 53 mm length with a 18.2 mm inside diameter (1.693 × 2.087 in × 0.717 in ID). Confirm against the housing drawing before ordering.
What micron rating does DVD218E10B use?
This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the DVD218E10B filter element?
2 catalog-confirmed full match(es) (218K10P, CF218A10NA); 1 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 13 catalog element(s) share the 43×53 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

Other models in the Filtrec elements series

All 9874 (list page 8/20) →

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.