Filtrec · Filtrec elements · inline line

DMD127D10B filter element: specifications & equivalents

Q: What are the dimensions of the DMD127D10B filter element?

The published envelope is 51.5 mm OD × 178 mm length with a 32.2 mm inside diameter (2.028 × 7.008 in × 1.268 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD127D10B use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD127D10B is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 51.5 × 178 mm OD × length (ID 32.2 mm), rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 51.5 × 178 mm

Inside diameter 32.2 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	51.5 mm
Inside diameter ID	32.2 mm
Length	178 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD127D10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	51.5 mm (2.028 in)
Inside diameter	32.2 mm (1.268 in)
Overall length	178 mm (7.008 in)

All 52×178 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 1880P10C000M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps REXROTH 18.80P10C000M to FILTREC DMD127D10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 1880P10C000P page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps EPPENSTEINER 18.80P10C000P to FILTREC DMD127D10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF8127P10HA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF8127P10HA to FILTREC DMD127D10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SL-022-D-10-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SL022D10B to FILTREC DMD127D10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD127D10B model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD127D10B filter element?

The published envelope is 51.5 mm OD × 178 mm length with a 32.2 mm inside diameter (2.028 × 7.008 in × 1.268 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD127D10B use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD127D10B filter element?

4 catalog-confirmed full match(es) (1880P10C000M, 1880P10C000P, CF8127P10HA…)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 10 catalog element(s) share the 52×178 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DMD127D10V Filtrec · 10 µm DMD127D20B Filtrec · 25 µm DMD127F03B Filtrec · 5 µm DMD127F10B Filtrec · 12 µm DMD127F20B Filtrec · 22 µm DMD127W100B Filtrec · 100 µm DMD127W10B Filtrec · 10 µm DMD127W25B Filtrec · 25 µm DMD127W40B Filtrec · 40 µm DMD127W60B Filtrec · 60 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.