Filtrec · Filtrec elements · inline line

DMD070E20B filter element: specifications & equivalents

Q: What are the dimensions of the DMD070E20B filter element?

The published envelope is 150 mm OD × 205 mm length with a 89 mm inside diameter (5.906 × 8.071 in × 3.504 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD070E20B use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD070E20B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 150 × 205 mm OD × length (ID 89 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 150 × 205 mm

Inside diameter 89 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	150 mm
Inside diameter ID	89 mm
Length	205 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD070E20B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	150 mm (5.906 in)
Inside diameter	89 mm (3.504 in)
Overall length	205 mm (8.071 in)

All 150×205 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ CF8070A25NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF8070A25NA to FILTREC DMD070E20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ LL-050-E-20-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF LL050E20B to FILTREC DMD070E20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 51816	WIX Filters	partial	Filtrec's official Cross Navigator maps FILTER MART 51816 to FILTREC DMD070E20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (23 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD070E20B model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD070E20B filter element?

The published envelope is 150 mm OD × 205 mm length with a 89 mm inside diameter (5.906 × 8.071 in × 3.504 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD070E20B use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD070E20B filter element?

2 catalog-confirmed full match(es) (CF8070A25NA, LL-050-E-20-B); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 21 catalog element(s) share the 150×205 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DMD070B100B Filtrec · 100 µm DMD070B10B Filtrec · 10 µm DMD070B25B Filtrec · 25 µm DMD070B60B Filtrec · 60 µm DMD070E03B Filtrec · 5 µm DMD070E10B Filtrec · 12 µm DMD070L10B Filtrec · 10 µm DMD070L20B Filtrec · 25 µm DMD087B100B Filtrec · 100 µm DMD087B10B Filtrec · 10 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.