Filtrec · Filtrec elements · inline line

DMD059E10B filter element: specifications & equivalents

Q: What are the dimensions of the DMD059E10B filter element?

The published envelope is 115 mm OD × 153 mm length with a 65 mm inside diameter (4.528 × 6.024 in × 2.559 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD059E10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD059E10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 115 × 153 mm OD × length (ID 65 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 115 × 153 mm

Inside diameter 65 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	115 mm
Inside diameter ID	65 mm
Length	153 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD059E10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	115 mm (4.528 in)
Inside diameter	65 mm (2.559 in)
Overall length	153 mm (6.024 in)

All 115×153 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 852059SM10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTRATION GROUP 852059SM10 to FILTREC DMD059E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF8059A10NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF8059A10NA to FILTREC DMD059E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ LL-045-E-10-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF LL045E10B to FILTREC DMD059E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD059E10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD059E10B filter element?

The published envelope is 115 mm OD × 153 mm length with a 65 mm inside diameter (4.528 × 6.024 in × 2.559 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD059E10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD059E10B filter element?

3 catalog-confirmed full match(es) (852059SM10, CF8059A10NA, LL-045-E-10-B)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 7 catalog element(s) share the 115×153 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DMD059B100B Filtrec · 100 µm DMD059B10B Filtrec · 10 µm DMD059B25B Filtrec · 25 µm DMD059B60B Filtrec · 60 µm DMD059E20B Filtrec · 22 µm DMD059L10B Filtrec · 10 µm DMD059L20B Filtrec · 25 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.