Filtrec · Filtrec elements · inline line

DMD0045E10B filter element: specifications & equivalents

Q: What are the dimensions of the DMD0045E10B filter element?

The published envelope is 83 mm OD × 373 mm length with a 47.4 mm inside diameter (3.268 × 14.685 in × 1.866 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD0045E10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD0045E10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 83 × 373 mm OD × length (ID 47.4 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 83 × 373 mm

Inside diameter 47.4 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	83 mm
Inside diameter ID	47.4 mm
Length	373 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD0045E10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	83 mm (3.268 in)
Inside diameter	47.4 mm (1.866 in)
Overall length	373 mm (14.685 in)

All 83×373 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 2450D10BN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 2450D10BN to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 9640514103 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps PTI 9640514103 to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF145A10NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF145A10NA to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FP101191 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILPRO FP101191 to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC2235FCS15	Pall	full	Filtrec's official Cross Navigator maps PALL HC2235FCS15 to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P174300 page in verification queue	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P174300 to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P567103	Donaldson	full	Filtrec's official Cross Navigator maps DONALDSON P567103 to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PI3145SM10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTRATION GROUP PI3145SM10 to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PMH85151510G page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps NATIONAL FILTERS PMH85151510G to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PT8953MPG page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps BALDWIN PT8953MPG to FILTREC DMD0045E10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HD976	MANN-FILTER	partial	MANN-FILTER's online catalog lists DMD0045E10B (FILTREC) as a comparison number for HD976. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SL-125-E-10-B	STAUFF	partial	STAUFF Filter Interchange lists DMD0045E10B (FILTREC) as replaced by SL-125-E-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD0045E10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD0045E10B filter element?

The published envelope is 83 mm OD × 373 mm length with a 47.4 mm inside diameter (3.268 × 14.685 in × 1.866 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD0045E10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD0045E10B filter element?

10 catalog-confirmed full match(es) (2450D10BN, 9640514103, CF145A10NA…); 2 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 57 catalog element(s) share the 83×373 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R3.0938-06K1 ARGO-HYTOS · 10 µm DMD0045B100B Filtrec · 100 µm DMD0045B10B Filtrec · 10 µm DMD0045B25B Filtrec · 25 µm DMD0045B400B Filtrec · 400 µm DMD0045B40B Filtrec · 40 µm DMD0045B60B Filtrec · 60 µm DMD0045D10B Filtrec · 10 µm DMD0045D20B Filtrec · 25 µm DMD0045E03B Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.