Filtrec · Filtrec elements · inline line

DMD0011F10B filter element: specifications & equivalents

Q: What are the dimensions of the DMD0011F10B filter element?

The published envelope is 47 mm OD × 246 mm length with a 25.5 mm inside diameter (1.850 × 9.685 in × 1.004 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD0011F10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD0011F10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 47 × 246 mm OD × length (ID 25.5 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 47 × 246 mm

Inside diameter 25.5 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	47 mm
Inside diameter ID	25.5 mm
Length	246 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD0011F10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	47 mm (1.850 in)
Inside diameter	25.5 mm (1.004 in)
Overall length	246 mm (9.685 in)

All 47×246 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 2100D10BH page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 2100D10BH to FILTREC DMD0011F10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 2110D10BH page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 2110D10BH to FILTREC DMD0011F10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF111A10HA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF111A10HA to FILTREC DMD0011F10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FP52428 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTRATION POINT FP52428 to FILTREC DMD0011F10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SL-030-F-10-B	STAUFF	partial	STAUFF Filter Interchange lists DMD0011F10B (FILTREC) as replaced by SL-030-F-10-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD0011F10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD0011F10B filter element?

The published envelope is 47 mm OD × 246 mm length with a 25.5 mm inside diameter (1.850 × 9.685 in × 1.004 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD0011F10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD0011F10B filter element?

4 catalog-confirmed full match(es) (2100D10BH, 2110D10BH, CF111A10HA…); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 20 catalog element(s) share the 47×246 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DMD0011B100B Filtrec · 100 µm DMD0011B10B Filtrec · 10 µm DMD0011B25B Filtrec · 25 µm DMD0011B40B Filtrec · 40 µm DMD0011B60B Filtrec · 60 µm DMD0011D10B Filtrec · 10 µm DMD0011D20B Filtrec · 25 µm DMD0011E03B Filtrec · 5 µm DMD0011E05B Filtrec · 7 µm DMD0011E10B Filtrec · 12 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.