Filtrec · Filtrec elements · inline line

DMD0008W1000B filter element: specifications & equivalents

Q: What are the dimensions of the DMD0008W1000B filter element?

The published envelope is 47 mm OD × 172 mm length with a 25.5 mm inside diameter (1.850 × 6.772 in × 1.004 in ID). Confirm against the housing drawing before ordering.

The DMD0008W1000B is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 47 × 172 mm OD × length (ID 25.5 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 47 × 172 mm

Inside diameter 25.5 mm

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Outside diameter OD	47 mm
Inside diameter ID	25.5 mm
Length	172 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD0008W1000B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	47 mm (1.850 in)
Inside diameter	25.5 mm (1.004 in)
Overall length	172 mm (6.772 in)

All 47×172 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ PMH850571000SSHC page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps NATIONAL FILTERS PMH850571000SSHC to FILTREC DMD0008W1000B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD0008W1000B model number is decoded

T1000Filtrec internal media grade code (wire-mesh).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Frequently asked questions

What are the dimensions of the DMD0008W1000B filter element?

The published envelope is 47 mm OD × 172 mm length with a 25.5 mm inside diameter (1.850 × 6.772 in × 1.004 in ID). Confirm against the housing drawing before ordering.

What replaces the DMD0008W1000B filter element?

1 catalog-confirmed full match(es) (PMH850571000SSHC)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 61 catalog element(s) share the 47×172 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

04.PI 5208.6VG.HR.E.O Eaton / Internormen · 7 µm 04.PI 9708.250G.HR.E.O Eaton / Internormen · 250 µm DMD0008B100B Filtrec · 100 µm DMD0008B10B Filtrec · 10 µm DMD0008B200B Filtrec · 200 µm DMD0008B25B Filtrec · 25 µm DMD0008B300B Filtrec · 300 µm DMD0008B40B Filtrec · 40 µm DMD0008B60B Filtrec · 60 µm DMD0008D10B Filtrec · 10 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.