Filtrec · Filtrec elements · inline line

DMD0008D20B filter element: specifications & equivalents

Q: What are the dimensions of the DMD0008D20B filter element?

The published envelope is 47 mm OD × 172 mm length with a 25.5 mm inside diameter (1.850 × 6.772 in × 1.004 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DMD0008D20B use?

This element is rated 25 µm (nominal class) — β25(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DMD0008D20B is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 47 × 172 mm OD × length (ID 25.5 mm), rated at 25 µm class (β25(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 47 × 172 mm

Inside diameter 25.5 mm

Filtration rating 25 µm nom.

Beta rating β 25(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	25 µm
Rating basis	nominal
Beta ratio	β25(c)≥2
Outside diameter OD	47 mm
Inside diameter ID	25.5 mm
Length	172 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DMD0008D20B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	47 mm (1.850 in)
Inside diameter	25.5 mm (1.004 in)
Overall length	172 mm (6.772 in)

All 47×172 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ PI1008MIC25 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTRATION GROUP PI1008MIC25 to FILTREC DMD0008D20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PT9267	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN PT9267 to FILTREC DMD0008D20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HD513/5	MANN-FILTER	partial	MANN-FILTER's online catalog lists DMD0008D20B (FILTREC) as a comparison number for HD5135. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SL-020-D-20-B	STAUFF	partial	STAUFF Filter Interchange lists DMD0008D20B (FILTREC) as replaced by SL-020-D-20-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DMD0008D20B model number is decoded

C25Filtrec internal media grade code (cellulose, 25 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DMD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DMD0008D20B filter element?

The published envelope is 47 mm OD × 172 mm length with a 25.5 mm inside diameter (1.850 × 6.772 in × 1.004 in ID). Confirm against the housing drawing before ordering.

What micron rating does DMD0008D20B use?

This element is rated 25 µm (nominal class) — β25(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DMD0008D20B filter element?

2 catalog-confirmed full match(es) (PI1008MIC25, PT9267); 2 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 61 catalog element(s) share the 47×172 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

04.PI 5208.6VG.HR.E.O Eaton / Internormen · 7 µm 04.PI 9708.250G.HR.E.O Eaton / Internormen · 250 µm DMD0008B100B Filtrec · 100 µm DMD0008B10B Filtrec · 10 µm DMD0008B200B Filtrec · 200 µm DMD0008B25B Filtrec · 25 µm DMD0008B300B Filtrec · 300 µm DMD0008B40B Filtrec · 40 µm DMD0008B60B Filtrec · 60 µm DMD0008D10B Filtrec · 10 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.