Filtrec · Filtrec elements · inline line

DLD100E10B0 filter element: specifications & equivalents

Q: What are the dimensions of the DLD100E10B0 filter element?

The published envelope is 60 mm OD × 199 mm length with a 32.5 mm inside diameter (2.362 × 7.835 in × 1.280 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DLD100E10B0 use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DLD100E10B0 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 60 × 199 mm OD × length (ID 32.5 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 60 × 199 mm

Inside diameter 32.5 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	60 mm
Inside diameter ID	32.5 mm
Length	199 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DLD100E10B0
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	60 mm (2.362 in)
Inside diameter	32.5 mm (1.280 in)
Overall length	199 mm (7.835 in)

All 60×199 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ PIN10025810GV page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps NATIONAL FILTERS PIN10025810GV to FILTREC DLD100E10B0 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 01.N 100.10VG.16.E.P.-	Eaton / Internormen	partial	Filtrec's official Cross Navigator maps INTERNORMEN 01N10010VG16EP to FILTREC DLD100E10B0 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DLD100E10B0 model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DLD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DLD100E10B0 filter element?

The published envelope is 60 mm OD × 199 mm length with a 32.5 mm inside diameter (2.362 × 7.835 in × 1.280 in ID). Confirm against the housing drawing before ordering.

What micron rating does DLD100E10B0 use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DLD100E10B0 filter element?

1 catalog-confirmed full match(es) (PIN10025810GV); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 18 catalog element(s) share the 60×199 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DLD100B10B0 Filtrec · 10 µm DLD100B10V0 Filtrec · 10 µm DLD100B25B0 Filtrec · 25 µm DLD100B25V0 Filtrec · 25 µm DLD100B40B0 Filtrec · 40 µm DLD100B40V0 Filtrec · 40 µm DLD100B80B0 Filtrec · 80 µm DLD100B80V0 Filtrec · 80 µm DLD100E03B0 Filtrec · 5 µm DLD100E03V0 Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 7/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.