Filtrec · Filtrec elements · inline line
DHD60G03B filter element: specifications & equivalents
The DHD60G03B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 47 × 84 mm OD × length (ID 22.4 mm), rated at 5 µm absolute (β5(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 5 µm |
| Rating basis | absolute |
| Beta ratio | β5(c)≥1000 |
| Outside diameter OD | 47 mm |
| Inside diameter ID | 22.4 mm |
| Length | 84 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | DHD60G03B |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 47 mm (1.850 in) |
| Inside diameter | 22.4 mm (0.882 in) |
| Overall length | 84 mm (3.307 in) |
All 47×84 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0060D003ONPS page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 0060D003ONPS to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 02.0060D.3VG.30.HC.E.P | Eaton / Internormen | full | Filtrec's official Cross Navigator maps INTERNORMEN 02.0060D.3VG.30.HC.E.P to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC2206FCP3H | Pall | full | Filtrec's official Cross Navigator maps PALL HC2206FCP3H to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ PR3056 | Parker | full | Filtrec's official Cross Navigator maps PARKER PR3056 to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ SE014D03B4 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps STAUFF SE014D03B4 to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ SE014G03B4 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps STAUFF SE014G03B4 to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 0060 D 003 ON | HYDAC | partial | Filtrec's official Cross Navigator maps HYDAC 0060D003ON to FILTREC DHD60G03B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (3 vs 5 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF6862 | Fleetguard | partial | Fleetguard's online catalog lists DHD60G03B as an interchange for HF6862. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT23379-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists DHD60G03B (FILTREC) as replaced by Baldwin PT23379-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-0060D-Z3B | Schroeder Industries | partial | Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals. |
| ↔ SE-014-G-03-B | STAUFF | partial | STAUFF Filter Interchange lists DHD60G03B (FILTREC) as replaced by SE-014-G-03-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the DHD60G03B model number is decoded
- G03Filtrec internal media grade code (glassfiber, 5 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
Frequently asked questions
What are the dimensions of the DHD60G03B filter element?
What micron rating does DHD60G03B use?
What replaces the DHD60G03B filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 75 catalog element(s) share the 47×84 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 6/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.