Filtrec · Filtrec elements · inline line
DHD330G10B filter element: specifications & equivalents
The DHD330G10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 90.5 × 162 mm OD × length (ID 48.2 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 90.5 × 162 mm
Inside diameter 48.2 mm
Filtration rating 12 µm abs.
Beta rating β 12(c)≥1000
Media glassfiber
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 12 µm |
| Rating basis | absolute |
| Beta ratio | β12(c)≥1000 |
| Outside diameter OD | 90.5 mm |
| Inside diameter ID | 48.2 mm |
| Length | 162 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | DHD330G10B |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 90.5 mm (3.563 in) |
| Inside diameter | 48.2 mm (1.898 in) |
| Overall length | 162 mm (6.378 in) |
All 91×162 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 0330D010ONPS page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 0330D010ONPS to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 890023SM10NBR page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FILTRATION GROUP 890023SM10NBR to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ D0330A10NHA page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FAI FILTRI D0330A10NHA to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ H330D10N page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps SEPARATION TECHNOLOGIES H330D10N to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC2233FCS6H | Pall | full | Filtrec's official Cross Navigator maps PALL HC2233FCS6H to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC2233FKS6H | Pall | full | Filtrec's official Cross Navigator maps PALL HC2233FKS6H to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF30054 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF30054 to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ PR3174 | Parker | full | Filtrec's official Cross Navigator maps PARKER PR3174 to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ SE090D10B4 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps STAUFF SE090D10B4 to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SE-090-G-10-B | STAUFF | full | Filtrec's official Cross Navigator maps STAUFF SE090G10B to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ SE090G10B4 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps STAUFF SE090G10B4 to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ V0332B2C10 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps VICKERS V0332B2C10 to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 0330 D 010 ON | HYDAC | partial | Filtrec's official Cross Navigator maps HYDAC 0330D010ON to FILTREC DHD330G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HD1032 | MANN-FILTER | partial | MANN-FILTER's online catalog lists DHD330G10B (FILTREC) as a comparison number for HD1032. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF6876 | Fleetguard | partial | Fleetguard's online catalog lists DHD330G10B as an interchange for HF6876. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-0330D-Z10B | Schroeder Industries | partial | Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the DHD330G10B model number is decoded
- G10Filtrec internal media grade code (glassfiber, 12 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the DHD330G10B filter element?
The published envelope is 90.5 mm OD × 162 mm length with a 48.2 mm inside diameter (3.563 × 6.378 in × 1.898 in ID). Confirm against the housing drawing before ordering.
What micron rating does DHD330G10B use?
This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the DHD330G10B filter element?
12 catalog-confirmed full match(es) (0330D010ONPS, 890023SM10NBR, D0330A10NHA…); 4 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
Same-envelope elements from other brands
View full interchange →These 49 catalog element(s) share the 91×162 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
R3.1017-03K1 R3.1017-06K1 R3.1017-08K1 R3.1017-23K1 R3.1017-26K1 R3.1017-28K1 D1100G10A D1100G10AV D1100G10B D1100G10BV
Other models in the Filtrec elements series
All 9874 (list page 6/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.