Filtrec · Filtrec elements · inline line

DHD330D10B * filter element: specifications & equivalents

Q: What are the dimensions of the DHD330D10B * filter element?

The published envelope is 77 mm OD × 179 mm length with a 48.2 mm inside diameter (3.031 × 7.047 in × 1.898 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DHD330D10B * use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DHD330D10B * is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 77 × 179 mm OD × length (ID 48.2 mm), rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 77 × 179 mm

Inside diameter 48.2 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	77 mm
Inside diameter ID	48.2 mm
Length	179 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DHD330D10B *
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	77 mm (3.031 in)
Inside diameter	48.2 mm (1.898 in)
Overall length	179 mm (7.047 in)

All 77×179 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 890006MIC10NBR page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTRATION GROUP 890006MIC10NBR to FILTREC DHD330D10B * as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 9330P10A000M page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps REXROTH 9.330P10A000M to FILTREC DHD330D10B * as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 9330P10A000P page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps EPPENSTEINER 9.330P10A000P to FILTREC DHD330D10B * as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ D0330P10NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI D0330P10NA to FILTREC DHD330D10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE-090-D-10-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SE090D10B to FILTREC DHD330D10B * as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DHD330D10B * model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DHD330D10B * filter element?

The published envelope is 77 mm OD × 179 mm length with a 48.2 mm inside diameter (3.031 × 7.047 in × 1.898 in ID). Confirm against the housing drawing before ordering.

What micron rating does DHD330D10B * use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DHD330D10B * filter element?

5 catalog-confirmed full match(es) (890006MIC10NBR, 9330P10A000M, 9330P10A000P…)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 9 catalog element(s) share the 77×179 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

DHD330B100B Filtrec · 100 µm DHD330B100V Filtrec · 100 µm DHD330B200B Filtrec · 200 µm DHD330B200V Filtrec · 200 µm DHD330B25B Filtrec · 25 µm DHD330D03B * Filtrec · 3 µm DHD330D05B * Filtrec DHD330D20B * Filtrec · 25 µm DHD330E10B * Filtrec · 12 µm

Other models in the Filtrec elements series

All 9874 (list page 6/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.